This file documents GNU libmatheval library.

Copyright © 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2011, 2012 Aleksandar Samardzic

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with the Invariant Sections being “Rationale and history”, with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the license is included in the section entitled “Copying”.


Next: , Previous: (dir), Up: (dir)

GNU libmatheval manual

GNU libmatheval is small library of procedures for evaluating mathematical functions. This manual documents how to use the library; this is manual edition 1.1.9, last updated 22 September 2012, corresponding to library version 1.1.9.


Next: , Previous: Top, Up: Top

License

GNU libmatheval is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

GNU libmatheval is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with GNU libmatheval. If not, see <http://www.gnu.org/licenses/>.


Next: , Previous: License, Up: Top

1 Introduction

GNU libmatheval is library comprising several procedures that makes possible to create in-memory tree representation of mathematical functions over single or multiple variables and later use this representation to evaluate function for specified variable values, to create corresponding tree for function derivative over specified variable or to get back textual representation of in-memory tree.

This section discuss use of programming interface exposed by library from C programs. Readers interested in Fortran interface should switch immediately to Fortran interface section.

In order to use GNU libmatheval library from C code, it is necessary first to include header file matheval.h from all files calling GNU libmatheval procedures and then refer to libmatheval library among other linker option. Thus, command to compile C program using library and stored in file example.c using GNU C compiler would look like (supposing that library is installed using default prefix /usr/local/lib):

     gcc example.c -I/usr/local/include -L/usr/local/lib -lmatheval -o example

Alternatively, pkg-config metadata file for libmatheval is installed along with the library too, thus on system with pkg-config installed following command could be used instead:

     gcc example.c $(pkg-config --cflags --libs) -o example

First step in actually utilizing library after including appropriate header file would be to declare variable of void * type to point to evaluator object that will represent given mathematical function:

     void *f;

Then, given that textual representation of function is stored into string buffer, evaluator object corresponding to given mathematical function could be created using evaluator_create procedure (see evaluator_create) as follows (see documentation for this procedure also for description of notation that should be used to describe mathematical functions):

     f = evaluator_create (buffer);
     assert (f);

Return value should be always checked, because above procedure will return null pointer if there exist syntax errors in notation. After that, one could utilize evaluator_get_variables (see evaluator_get_variables) procedure to obtain a list of variable names appearing in function:

     {
       char **names;
       int count;
       int i;
     
       evaluator_get_variables (f, &names, &count);
       for (i = 0; i < count; i++)
         printf ("%s ", names[i]);
       printf ("\n");
     }

Procedure evaluator_evaluate (see evaluator_evaluate) could be used to evaluate function for specific variable values. Say that above function is over variable “x” only, then following code will evaluate and print function value for x = 0.1:

     {
       char *names[] = { "x" };
       double values[] = { 0.1 };
     
       printf ("f(0.1) = %g\n", evaluator_evaluate (f, 1, names,
                                                    values));
     }

Or alternatively, since function is over variable with standard name “x”, convenience procedure evaluator_evaluate_x (evaluator_evaluate_x) could be used to accomplish same by following:

     printf ("f(0.1) = %g\n", evaluator_evaluate_x (f, 0.1));

Evaluator object for function derivative over some variable could be created from evaluator object for given function. In order to accomplish this, a declaration for derivative evaluator object should be added to variable declarations section:

     void *f_prim;

After that (supposing that “x” is used as derivation variable), derivative evaluator object could be created using evaluator_derivative procedure (see evaluator_derivative):

     f_prim = evaluator_derivative (f, "x");

or alternatively using evaluator_derivative_x convenience procedure (see evaluator_derivative_x):

     f_prim = evaluator_derivative_x (f);

Derivative evaluator object could be used to evaluate derivative values or say textual representation of derivative could be written to standard output through utilizing evaluator_get_string procedure (see evaluator_get_string) to get string representing given evaluator. Following code would accomplish this:

     printf ("  f'(x) = %s\n", evaluator_get_string (f_prim));

All evaluator objects must be destroyed after finished with using them and evaluator_destroy procedure (see evaluator_destroy) is intended for this:

     evaluator_destroy (f);
     evaluator_destroy (f_prim);

Here follows complete program connecting above fragments. Program read from standard input string representing function over variable “x”, create evaluators for function and its first derivative, print textual representation of function derivative to standard output, then read value of variable “x” and finally print to standard output values of function and its first derivative for given value of variable “x”.

     #include <stdio.h>
     #include <stdlib.h>
     #include <string.h>
     #include <assert.h>
     #include <matheval.h>
     
     /* Size of input buffer.  */
     #define BUFFER_SIZE 256
     
     /* Program is demonstrating use of GNU libmatheval library of procedures
        for evaluating mathematical functions.  */
     int
     main (int argc, char **argv)
     {
       char buffer[BUFFER_SIZE];	/* Input buffer.  */
       int length;			/* Length of above buffer. */
       void *f, *f_prim;		/* Evaluators for function and function derivative.  */
       char **names;			/* Function variables names. */
       int count;			/* Number of function variables. */
       double x;			/* Variable x value.  */
       int i;			/* Loop counter. */
     
       /* Read function.  Function has to be over variable x, or result may
          be undetermined.  Size of textual represenatation of function is
          bounded here to 256 characters, in real conditions one should
          probably use GNU readline() instead of fgets() to overcome this
          limit.  */
       printf ("f(x) = ");
       fgets (buffer, BUFFER_SIZE, stdin);
       length = strlen (buffer);
       if (length > 0 && buffer[length - 1] == '\n')
         buffer[length - 1] = '\0';
     
       /* Create evaluator for function.  */
       f = evaluator_create (buffer);
       assert (f);
     
       /* Print variable names appearing in function. */
       evaluator_get_variables (f, &names, &count);
       printf ("  ");
       for (i = 0; i < count; i++)
         printf ("%s ", names[i]);
       printf ("\n");
     
       /* Create evaluator for function derivative and print textual
          representation of derivative.  */
       f_prim = evaluator_derivative_x (f);
       printf ("  f'(x) = %s\n", evaluator_get_string (f_prim));
     
       /* Read variable x value.  */
       printf ("x = ");
       scanf ("%lf", &x);
     
       /* Calculate and print values of function and its derivative for given
          value of x.  */
       printf ("  f(%g) = %g\n", x, evaluator_evaluate_x (f, x));
       printf ("  f'(%g) = %g\n", x, evaluator_evaluate_x (f_prim, x));
     
       /* Destroy evaluators.  */
       evaluator_destroy (f);
       evaluator_destroy (f_prim);
     
       exit (EXIT_SUCCESS);
     }

Above example exercise most of library main procedures (see Main entry points), as well as some of convenience procedures (see Convenience procedures). For full documentation, see Reference.


Next: , Previous: Introduction, Up: Top

2 Reference

This section documents procedures constituting GNU libmatheval library. The convention is that all procedures have evaluator_ prefix.


Next: , Previous: Reference, Up: Reference

2.1 Main entry points


Next: , Previous: Main entry points, Up: Main entry points

2.1.1 evaluator_create

Synopsis
     #include <matheval.h>
     
     void *evaluator_create (char *string);
Description

Create evaluator object from string containing mathematical representation of function. Evaluator object could be used later to evaluate function for specific variable values or to calculate function derivative over some variable.

String representation of function is allowed to consist of decimal numbers, constants, variables, elementary functions, unary and binary operations.

Supported constants are (names that should be used are given in parenthesis): e (e), log2(e) (log2e), log10(e) (log10e), ln(2) (ln2), ln(10) (ln10), pi (pi), pi / 2 (pi_2), pi / 4 (pi_4), 1 / pi (1_pi), 2 / pi (2_pi), 2 / sqrt(pi) (2_sqrtpi), sqrt(2) (sqrt) and sqrt(1 / 2) (sqrt1_2).

Variable name is any combination of alphanumericals and _ characters beginning with a non-digit that is not elementary function name.

Supported elementary functions are (names that should be used are given in parenthesis): exponential (exp), logarithmic (log), square root (sqrt), sine (sin), cosine (cos), tangent (tan), cotangent (cot), secant (sec), cosecant (csc), inverse sine (asin), inverse cosine (acos), inverse tangent (atan), inverse cotangent (acot), inverse secant (asec), inverse cosecant (acsc), hyperbolic sine (sinh), cosine (cosh), hyperbolic tangent (tanh), hyperbolic cotangent (coth), hyperbolic secant (sech), hyperbolic cosecant (csch), hyperbolic inverse sine (asinh), hyperbolic inverse cosine (acosh), hyperbolic inverse tangent (atanh), hyperbolic inverse cotangent (acoth), hyperbolic inverse secant (asech), hyperbolic inverse cosecant (acsch), absolute value (abs), Heaviside step function (step) with value 1 defined for x = 0, Dirac delta function with infinity (delta) and not-a-number (nandelta) values defined for x = 0, and error function (erf).

Supported unary operation is unary minus ('-').

Supported binary operations are addition ('+'), subtraction ('+'), multiplication ('*'), division multiplication ('/') and exponentiation ('^').

Usual mathematical rules regarding operation precedence apply. Parenthesis ('(' and ')') could be used to change priority order.

Blanks and tab characters are allowed in string representing function; newline characters must not appear in this string.

Return value

Pointer to evaluator object if operation successful, null pointer otherwise. Evaluator object is opaque, one should only use return pointer to pass it to other functions from library.

See also

evaluator_destroy, evaluator_evaluate, evaluator_get_string, evaluator_get_variables, evaluator_derivative


Next: , Previous: evaluator_create, Up: Main entry points

2.1.2 evaluator_destroy

Synopsis
     #include <matheval.h>
     
     void evaluator_destroy (void *evaluator);
Description

Destroy evaluator object pointer by evaluator pointer. After returning from this call evaluator pointer must not be dereferenced because evaluator object gets invalidated.

Return value

None.

See also

evaluator_create


Next: , Previous: evaluator_destroy, Up: Main entry points

2.1.3 evaluator_evaluate

Synopsis
     #include <matheval.h>
     
     double evaluator_evaluate (void *evaluator, int count, char **names,
     				    double *values);
Description

Calculate value of function represented by evaluator object for given variable values. Evaluator object is pointed by evaluator pointer. Variable names and corresponding values are given by names and values array respectively. Length of arrays is given by count argument.

Return value

Function value for given variable values. If some variable that appears in function is not mentioned in arguments, result is indeterminate. If all variables that appear in function are given, presence of variable or variables that doesn't appear in function in arguments has no effect, i.e. result is still exact.

See also

evaluator_create, evaluator_destroy, evaluator_evaluate_x, evaluator_evaluate_x_y, evaluator_evaluate_x_y_z


Next: , Previous: evaluator_evaluate, Up: Main entry points

2.1.4 evaluator_get_string

Synopsis
     #include <matheval.h>
     
     char *evaluator_get_string (void *evaluator);
Description

Return textual representation (i.e. mathematical function) of evaluator object pointed by evaluator. For notation used, see evaluator_create documentation.

Return value

String with textual representation of evaluator object. This string is stored in evaluator object and caller must not free pointer returned by this function. Returned string is valid until evaluator object destroyed.

See also

evaluator_create, evaluator_destroy, evaluator_get_variables


Next: , Previous: evaluator_get_string, Up: Main entry points

2.1.5 evaluator_get_variables

Synopsis
     #include <matheval.h>
     
     void evaluator_get_variables (void *evaluator, char ***names, int *count);
Description

Return array of strings with names of variables appearing in function represented by evaluator. Address of array first element is stored by function in location pointed by second argument and number of array elements is stored in location pointed by third argument. Array with function variable names is stored in evaluator object and caller must not free any of strings returned by this function nor array itself. Returned values are valid until evaluator object destroyed.

Return value

None.

See also

evaluator_create, evaluator_destroy, evaluator_get_string


Previous: evaluator_get_variables, Up: Main entry points

2.1.6 evaluator_derivative

Synopsis
     #include <matheval.h>
     
     void *evaluator_derivative (void *evaluator, char *name);
Description

Create evaluator for derivative of function represented by given evaluator object. Evaluator object is pointed to by evaluator pointer and derivation variable is determined by name argument. Calculated derivative is in mathematical sense correct no matters of fact that derivation variable appears or not in function represented by evaluator.

Return value

Pointer to evaluator object representing derivative of given function.

See also

evaluator_create, evaluator_destroy, evaluator_derivative_x, evaluator_derivative_y, evaluator_derivative_z


Previous: Main entry points, Up: Reference

2.2 Convenience procedures


Next: , Previous: Convenience procedures, Up: Convenience procedures

2.2.1 evaluator_evaluate_x

Synopsis
     #include <matheval.h>
     
     double evaluator_evaluate_x (void *evaluator, double x);
Description

Convenience function to evaluate function for given variable “x” value. Function is equivalent to following:

     char *names[] = { "x" };
     double values[] = { x };
     
     evaluator_evaluate (evaluator, sizeof (names) / sizeof(names[0]),
     			     names, values);

See evaluator_evaluate for further information.

Return value

Value of function for given value of variable “x”.

See also

evaluator_create, evaluator_destroy, evaluator_evaluate


Next: , Previous: evaluator_evaluate_x, Up: Convenience procedures

2.2.2 evaluator_evaluate_x_y

Synopsis
     #include <matheval.h>
     
     double evaluator_evaluate_x_y (void *evaluator, double x, double y);
Description

Convenience function to evaluate function for given variables “x” and “y” values. Function is equivalent to following:

     char *names[] = { "x", "y" };
     double values[] = { x, y };
     
     evaluator_evaluate (evaluator, sizeof (names) / sizeof(names[0]),
     			     names, values);

See evaluator_evaluate for further information.

Return value

Value of function for given values of variables “x” and “y”.

See also

evaluator_create, evaluator_destroy, evaluator_evaluate


Next: , Previous: evaluator_evaluate_x_y, Up: Convenience procedures

2.2.3 evaluator_evaluate_x_y_z

Synopsis
     #include <matheval.h>
     
     double evaluator_evaluate_x_y_z (void *evaluator, double x, double y,
     					  double z);
Description

Convenience function to evaluate function for given variables “x”, “y” and “z” values. Function is equivalent to following:

     char *names[] = { "x", "y", "z" };
     double values[] = { x, y, z };
     
     evaluator_evaluate (evaluator, sizeof (names) / sizeof(names[0]),
     			     names, values);

See evaluator_evaluate for further information.

Return value

Value of function for given values of variables “x”, “y” and “z”.

See also

evaluator_create, evaluator_destroy, evaluator_evaluate


Next: , Previous: evaluator_evaluate_x_y_z, Up: Convenience procedures

2.2.4 evaluator_derivative_x

Synopsis
     #include <matheval.h>
     
     void *evaluator_derivative_x (void *evaluator);
Description

Convenience function to differentiate function using “x” as derivation variable. Function is equivalent to:

     evaluator_derivative (evaluator, "x");

See evaluator_derivative for further information.

Return value

Evaluator object representing derivative of function over variable “x”.

See also

evaluator_create, evaluator_destroy, evaluator_derivative


Next: , Previous: evaluator_derivative_x, Up: Convenience procedures

2.2.5 evaluator_derivative_y

Synopsis
     #include <matheval.h>
     
     void *evaluator_derivative_y (void *evaluator);
Description

Convenience function to differentiate function using “y” as derivation variable. Function is equivalent to:

     evaluator_derivative (evaluator, "y");

See evaluator_derivative for further information.

Return value

Evaluator object representing derivative of function over variable “y”.

See also

evaluator_create, evaluator_destroy, evaluator_derivative


Previous: evaluator_derivative_y, Up: Convenience procedures

2.2.6 evaluator_derivative_z

Synopsis
     #include <matheval.h>
     
     void *evaluator_derivative_z (void *evaluator);
Description

Convenience function to differentiate function using “z” as derivation variable. Function is equivalent to:

     evaluator_derivative (evaluator, "z");

See evaluator_derivative for further information.

Return value

Evaluator object representing derivative of function over variable “z”.

See also

evaluator_create, evaluator_destroy, evaluator_derivative


Next: , Previous: Reference, Up: Top

3 Fortran interface

Fortran interface to GNU libmatheval library is very similar to C interface; still, complete documentation from Reference is reproduced here using Fortran terms in order to have Fortran programmer not to mess with C terms that he may not understand. Besides documentation for all library exported procedures, an example Fortran program of structure similar to sequence of code fragments presented for C programmers in Introduction section as well as notes on how to link library with Fortran programs are presented here.

Since passing arguments between C and Fortran is not (yet) standardized, Fortran interface of library applies only to GNU Fortran 77 compiler; but note that same interface is working fine for GNU Fortran 95 compiler. Requests to adapt interface to other Fortran compilers are welcome (see section Bugs for contact information), under condition that access to corresponding compiler is provided.


Next: , Previous: Fortran interface, Up: Fortran interface

3.1 Fortran main entry points


Next: , Previous: Fortran main entry points, Up: Fortran main entry points

3.1.1 evaluator_create

Synopsis
     integer*8 function evaluator_create (string) character(len=*) ::
     string end function evaluator_create
Description

Create evaluator object from string containing mathematical representation of function. Evaluator object could be used later to evaluate function for specific variable values or to calculate function derivative over some variable.

String representation of function is allowed to consist of decimal numbers, constants, variables, elementary functions, unary and binary operations.

Supported constants are (names that should be used are given in parenthesis): e (e), log2(e) (log2e), log10(e) (log10e), ln(2) (ln2), ln(10) (ln10), pi (pi), pi / 2 (pi_2), pi / 4 (pi_4), 1 / pi (1_pi), 2 / pi (2_pi), 2 / sqrt(pi) (2_sqrtpi), sqrt(2) (sqrt) and sqrt(1 / 2) (sqrt1_2).

Variable name is any combination of alphanumericals and _ characters beginning with a non-digit that is not elementary function name.

Supported elementary functions are (names that should be used are given in parenthesis): exponential (exp), logarithmic (log), square root (sqrt), sine (sin), cosine (cos), tangent (tan), cotangent (cot), secant (sec), cosecant (csc), inverse sine (asin), inverse cosine (acos), inverse tangent (atan), inverse cotangent (acot), inverse secant (asec), inverse cosecant (acsc), hyperbolic sine (sinh), cosine (cosh), hyperbolic tangent (tanh), hyperbolic cotangent (coth), hyperbolic secant (sech), hyperbolic cosecant (csch), hyperbolic inverse sine (asinh), hyperbolic inverse cosine (acosh), hyperbolic inverse tangent (atanh), hyperbolic inverse cotangent (acoth), hyperbolic inverse secant (asech), hyperbolic inverse cosecant (acsch), absolute value (abs), Heaviside step function (step) with value 1 defined for x = 0, Dirac delta function with infinity (delta) and not-a-number (nandelta) values defined for x = 0, and error function (erf)

Supported unary operation is unary minus ('-').

Supported binary operations are addition ('+'), subtraction ('+'), multiplication ('*'), division multiplication ('/') and exponentiation ('^').

Usual mathematical rules regarding operation precedence apply. Parenthesis ('(' and ')') could be used to change priority order.

Blanks and tab characters are allowed in string representing function; newline characters must not appear in this string.

Return value

Positive 64-bit integer representing evaluator object unique handle if operation successful, 0 otherwise. Return value should be used only to pass it to other functions from library.

See also

Fortran evaluator_destroy, Fortran evaluator_evaluate, Fortran evaluator_get_string_length, Fortran evaluator_get_string_chars, Fortran evaluator_get_variables_length, Fortran evaluator_get_variables_chars, Fortran evaluator_derivative


Next: , Previous: Fortran evaluator_create, Up: Fortran main entry points

3.1.2 evaluator_destroy

Synopsis
     subroutine evaluator_destroy (evaluator) integer*8 :: evaluator end
     subroutine evaluator_destroy
Description

Destroy evaluator object denoted by evaluator handle. After returning from this call evaluator object gets invalidated, so value of evaluator handle should not be used any more.

Return value

None.

See also

Fortran evaluator_create


Next: , Previous: Fortran evaluator_destroy, Up: Fortran main entry points

3.1.3 evaluator_evaluate

Synopsis
     double precision function evaluator_evaluate (evaluator, count, names,
     values) integer*8 :: evaluator integer :: count character(len=*) ::
     names double precision :: values dimension values(*) end function
     evaluator_evaluate
Description

Calculate value of function represented by evaluator object for given variable values. Evaluator object is identified by evaluator handle. Variable names are given by names string and corresponding values are given by values array respectively. Number of variables is given by count argument. Variable names in names string should be delimited by one or more blank characters.

Return value

Function value for given variable values. If some variable that appears in function is not mentioned in arguments, result is indeterminate. If all variables that appear in function are given, presence of variable or variables that doesn't appear in function in arguments has no effect, i.e. result is still exact.

See also

Fortran evaluator_create, Fortran evaluator_destroy, Fortran evaluator_evaluate_x, Fortran evaluator_evaluate_x_y, Fortran evaluator_evaluate_x_y_z


Next: , Previous: Fortran evaluator_evaluate, Up: Fortran main entry points

3.1.4 evaluator_get_string_length

Synopsis
     integer function evaluator_get_string_length (evaluator) integer*8 ::
     evaluator end function evaluator_get_string_length
Description

Return length of textual representation (i.e. mathematical function) of evaluator object pointed by evaluator.

Return value

Evaluator textual representation string length.

See also

Fortran evaluator_create, Fortran evaluator_destroy, Fortran evaluator_get_string_chars


Next: , Previous: Fortran evaluator_get_string_length, Up: Fortran main entry points

3.1.5 evaluator_get_string_chars

Synopsis
     subroutine evaluator_get_string_chars (evaluator) integer*8 ::
     evaluator character(len=*) :: string end subroutine
     evaluator_get_string_chars
Description

Write textual representation (i.e. mathematical function) of evaluator object pointed by evaluator to string specified. For notation used, see Fortran evaluator_create documentation. In order to declare string of appropriate length to be passed to this function, Fortran evaluator_get_string_length function should be utilized.

Return value

None.

See also

Fortran evaluator_create, Fortran evaluator_destroy, Fortran evaluator_get_string_length


Next: , Previous: Fortran evaluator_get_string_chars, Up: Fortran main entry points

3.1.6 evaluator_get_variables_length

Synopsis
     integer function evaluator_get_variables_length (evaluator) integer*8
     :: evaluator end function evaluator_get_variables_length
Description

Return length of string with names of all variables (separated by a blank character) appearing in evaluator object pointed by evaluator.

Return value

Variable names string length.

See also

Fortran evaluator_create, Fortran evaluator_destroy, Fortran evaluator_get_variables_chars


Next: , Previous: Fortran evaluator_get_variables_length, Up: Fortran main entry points

3.1.7 evaluator_get_variables_chars

Synopsis
     subroutine evaluator_get_variables_chars (evaluator) integer*8 ::
     evaluator character(len=*) :: string end subroutine
     evaluator_get_variables_chars
Description

Write names of all variables appearing in evaluator object pointed by evaluator into given string (separated by a blank character). In order to declare string of appropriate length to be passed to this function, Fortran evaluator_get_variables_length function should be utilized.

Return value

None.

See also

Fortran evaluator_create, Fortran evaluator_destroy, Fortran evaluator_get_variables_length


Previous: Fortran evaluator_get_variables_chars, Up: Fortran main entry points

3.1.8 evaluator_derivative

Synopsis
     integer*8 function evaluator_derivative (evaluator, name) integer*8 ::
     evaluator character(len=*) ::  name end function evaluator_derivative
Description

Create evaluator for derivative of function represented by given evaluator object. Evaluator object is identified by evaluator handle and derivation variable is determined by name argument. Calculated derivative is in mathematical sense correct no matters of fact that derivation variable appears or not in function represented by evaluator.

Return value

64-bit integer uniquely identifying evaluator object representing derivative of given function.

See also

Fortran evaluator_create, Fortran evaluator_destroy, Fortran evaluator_derivative_x, Fortran evaluator_derivative_y, Fortran evaluator_derivative_z


Next: , Previous: Fortran main entry points, Up: Fortran interface

3.2 Fortran convenience procedures


Next: , Previous: Fortran convenience procedures, Up: Fortran convenience procedures

3.2.1 evaluator_evaluate_x

Synopsis
     double precision function evaluator_evaluate_x (evaluator, x)
     integer*8 :: evaluator double precision ::  x end function
     evaluator_evaluate_x
Description

Convenience function to evaluate function for given variable “x” value. Function is equivalent to following:

     evaluator_evaluate (evaluator, 1, 'x', (/ x /))

See Fortran evaluator_evaluate for further information.

Return value

Value of function for given value of variable “x”.

See also

Fortran evaluator_create, Fortran evaluator_destroy, Fortran evaluator_evaluate


Next: , Previous: Fortran evaluator_evaluate_x, Up: Fortran convenience procedures

3.2.2 evaluator_evaluate_x_y

Synopsis
     double precision function evaluator_evaluate_x_y (evaluator, x, y)
     integer*8 :: evaluator double precision ::  x, y end function
     evaluator_evaluate_x_y
Description

Convenience function to evaluate function for given variables “x” and “y” values. Function is equivalent to following:

     evaluator_evaluate (evaluator, 2, 'x y', (/ x, y /))

See Fortran evaluator_evaluate for further information.

Return value

Value of function for given values of variables “x” and “y”.

See also

Fortran evaluator_create, Fortran evaluator_destroy, Fortran evaluator_evaluate


Next: , Previous: Fortran evaluator_evaluate_x_y, Up: Fortran convenience procedures

3.2.3 evaluator_evaluate_x_y_z

Synopsis
     double precision function evaluator_evaluate_x_y_z (evaluator, x, y,
     z) integer*8 :: evaluator double precision :: x, y, z end function
     evaluator_evaluate_x_y_z
Description

Convenience function to evaluate function for given variables “x”, “y” and “z” values. Function is equivalent to following:

     evaluator_evaluate (evaluator, 2, 'x y z', (/ x, y, z /))

See Fortran evaluator_evaluate for further information.

Return value

Value of function for given values of variables “x”, “y” and “z”.

See also

Fortran evaluator_create, Fortran evaluator_destroy, Fortran evaluator_evaluate


Next: , Previous: Fortran evaluator_evaluate_x_y_z, Up: Fortran convenience procedures

3.2.4 evaluator_derivative_x

Synopsis
     integer*8 function evaluator_derivative_x (evaluator) integer*8 ::
     evaluator end function evaluator_derivative_x
Description

Convenience function to differentiate function using “x” as derivation variable. Function is equivalent to:

     evaluator_derivative (evaluator, 'x');

See Fortran evaluator_derivative for further information.

Return value

Evaluator object representing derivative of function over variable “x”.

See also

Fortran evaluator_create, Fortran evaluator_destroy, Fortran evaluator_derivative


Next: , Previous: Fortran evaluator_derivative_x, Up: Fortran convenience procedures

3.2.5 evaluator_derivative_y

Synopsis
     integer*8 function evaluator_derivative_y (evaluator) integer*8 ::
     evaluator end function evaluator_derivative_y
Description

Convenience function to differentiate function using “y” as derivation variable. Function is equivalent to:

     evaluator_derivative (evaluator, 'y');

See Fortran evaluator_derivative for further information.

Return value

Evaluator object representing derivative of function over variable “y”.

See also

Fortran evaluator_create, Fortran evaluator_destroy, Fortran evaluator_derivative


Previous: Fortran evaluator_derivative_y, Up: Fortran convenience procedures

3.2.6 evaluator_derivative_z

Synopsis
     integer*8 function evaluator_derivative_z (evaluator) integer*8 ::
     evaluator end function evaluator_derivative_z
Description

Convenience function to differentiate function using “z” as derivation variable. Function is equivalent to:

     evaluator_derivative (evaluator, 'z');

See Fortran evaluator_derivative for further information.

Return value

Evaluator object representing derivative of function over variable “z”.

See also

Fortran evaluator_create, Fortran evaluator_destroy, Fortran evaluator_derivative


Next: , Previous: Fortran convenience procedures, Up: Fortran interface

3.3 Fortran sample program

Here follows sample program demonstrating use of library Fortran interface. Hopefully, comments throughout code will be enough for Fortran programmer to get acquainted with library usage. Basic functioning of program is equivalent to code presented for C programmer in Introduction sequence, except that textual representation of function derivative is not printed to standard output and this is avoided simply because of Fortran 77 ugly string handling. Following code is written in Fortran 77 with GNU Fortran 77 compiler extensions (most notable of these certainly is free form of source code).

     ! Program is demonstrating use of GNU libmatheval library of procedures
     ! for evaluating mathematical functions.
     program evaluator
       implicit none
     
       ! Declarations of GNU libmatheval procedures used.
       integer*8 evaluator_create
       integer*8 evaluator_derivative_x
       double precision evaluator_evaluate_x
       external evaluator_destroy
     
       ! Size of input buffer.
       integer :: BUFFER_SIZE
       parameter(BUFFER_SIZE = 256)
     
       character(len = BUFFER_SIZE) :: buffer ! Input buffer.
       integer*8 :: f, f_prim ! Evaluators for function and function derivative.
       double precision :: x ! Variable x value.
     
       ! Read function.  Function has to be over variable x, or result may
       ! be undetermined.  Size of textual represenatation will be truncated
       ! here to BUFFER_SIZE characters, in real conditions one should
       ! probably come with something smarter to avoid this limit.
       write (*, '(A)') 'f(x) = '
       read (*, '(A)') buffer
     
       ! Create evaluator for function.
       f = evaluator_create (buffer);
       if (f == 0) stop
     
       ! Create evaluator for function derivative.
       f_prim = evaluator_derivative_x (f);
       if (f_prim == 0) stop
     
       ! Read variable x value.
       write (*, '(A)') 'x = '
       read (*, *) x
     
       ! Calculate and print values of function and its derivative for given
       ! value of x.
       write (*,*) '  f (', x, ') = ', evaluator_evaluate_x (f, x)
       write (*,*) '  f'' (', x, ') = ', evaluator_evaluate_x (f_prim, x)
     
       ! Destroy evaluators.
       call evaluator_destroy (f)
       call evaluator_destroy (f_prim)
     end program evaluator


Previous: Fortran sample program, Up: Fortran interface

3.4 Fortran build process

In order to be able to reference GNU libmatheval procedures from Fortran code, declarations of procedures that will be used should be repeated, like demonstrated by Fortran sample program (once when interface upgraded to Fortran 90, modules and use statement will be employed here). Command for compilation Fortran program using library and stored in file example.f using GNU Fortran 77 compiler would look like (again supposing that library is installed using default prefix /usr/local/lib):

     f77 example.f -ff90 -ffree-form -L/usr/local/lib -lmatheval -o example


Next: , Previous: Fortran interface, Up: Top

4 Hacking


Next: , Previous: Hacking, Up: Hacking

4.1 Design notes

As usual with a free software project, ultimate reference for anyone willing to hack on it is its source code. Every effort is put to have source code properly commented; having in mind that GNU libmatheval is rather simple project, it is reasonable to expect that this would be enough for anyone interested in project internals to get acquainted with it. Still, this section will briefly explain project design. See Project structure section for description of where each functionality is located in source code.

Mathematical functions are represented as trees in computer memory. There are five different nodes in such a tree: number, constants, variables, functions, unary operations and binary operations. Single data structure is employed for tree nodes, while union is used over what is different among them. Numbers have unique value, unary and binary operations have unique pointer(s) to their operand(s) node(s). To represent constants, variables and functions, a symbol table is employed; thus constants, variables and functions have unique pointers to corresponding symbol table records (functions also have unique pointer to their argument node). All operations related to functions (e.g. evaluation or derivative calculation) are implemented as recursive operations on tree nodes. There exist a node operation that is not visible as external procedure and this is node simplification; this operation is very important regarding overall efficiency of other operations and is employed each time when new tree created.

Symbol table is implemented as hash table, where each bucket has linked list of records stored in it. Records store information of symbol name and type (variable or function), as well as some unique information related to evaluation: variable records store temporary variable value and function records store pointer to procedure used to actually calculate function value during evaluation. Hashing function described in A.V. Aho, R. Sethi, J.D. Ullman, “Compilers - Principle, Techniques, and Tools”, Addison-Wesley, 1986, pp 435-437 is used. Symbol tables are reference counted objects, i.e. could be shared.

Evaluator objects actually consists of function tree and reference to symbol table. Most of operations on evaluator objects are simply delegated to function tree root node.

For parsing strings representing mathematical functions, Lex and Yacc are employed. Scanner is creating symbol table records for variables, while for constants and functions it is only looking up existing symbol table records (before starting scanning, symbol table should be populated with records for constants and functions recognized by scanner). Parser is responsible for building function tree representation.

Couple error reporting procedures, as well as replacements for standard memory allocation routines are also present. These are rather standard for all GNU projects, so deserve no further discussion. Further present in project are couple procedures for mathematical functions not implemented by C standard library, like cotangent, inverse cotangent and some hyperbolic and inverse hyperbolic functions.

Also present in project are stubs for Fortran code calling library. These stubs uses knowledge of GNU Fortran 77 compiler calling conventions, take parameters from Fortran 77 calls, eventually mangle them to satisfy primary C library interface and call library procedures to actually do the work, finally eventually mangling return values to satisfy Fortran 77 calling conventions again.

Most important thing to know before criticizing library design is that it is intentionally left as simple as it could be. Decision is now that eventual library usage should direct its improvements. Some obvious and intended improvements if enough interest for library arise are enumerated in Intended improvements section. If having further suggestions, pleas see Bugs sections for contact information.


Next: , Previous: Design notes, Up: Hacking

4.2 Project structure

Interesting source files are mostly concentrated in lib subdirectory of distribution. Basic arrangement is rather standard for GNU projects, thus scanner is in scanner.l file, parser in parser.y, error handling routines are in error.c and error.h files, replacements for standard memory allocation routines are in xmalloc.c and xmalloc.h, additional mathematical functions are in xmath.c and xmath.c. Project specific files are: node.h and node.c files for tree representing mathematical function data structures and procedures, symbol_table.c and symbol_table.h for symbol table data structures and procedures and finally evaluator.c and matheval.h for evaluator object data structures and procedures (evaluator object data structure is moved to .c file because matheval.h is public header file and this data structure should be opaque). Fortran interface is implemented in f77_interface.c file.

File libmatheval.texi under doc subdirectory of distribution contains Texinfo source of project documentation (i.e. what you are reading now).

Subdirectory tests contains library test suite. Kind of mixed design is employed here - GNU autotest is used for test framework in order to achieve more portability, while number of small Guile scripts are performing tests. File matheval.c in tests subdirectory contains program extending Guile interpreter with GNU libmatheval procedures. Files with .at extension in same subdirectory in turn consist of fragments of Guile code that this extended Guile interpreter executes in order to conduct tests. File matheval.sh is shell wrapper for program contained in matheval.c file; this wrapper is used by autotest during testing instead of original program. Most interesting aspect of code from tests subdirectory is certainly Guile interface for library that is implemented in matheval.c file; anyone intending to write more tests must before approaching this task become familiar with this interface.


Previous: Project structure, Up: Hacking

4.3 Intended improvements

As stated in Design notes section, GNU libmatheval is designed with intention to be simple and understandable and to eventually have its usage to govern improvements. Thus, further work will be primarily directed by user requests and of course, as usual with free software projects, with amount of spare time of primary developer (see Bugs for contact information). However, there exist several obvious improvements that I'm willing to work on immediately if any interest of library arise and these are (in random order) listed below:

There exists also an improvement that is obvious and necessary but because I'm not native speaker I'm unfortunately not able to accomplish it anything more than I already tried:


Next: , Previous: Hacking, Up: Top

5 Bugs

If you encounter something that you think is a bug, please report it immediately. Try to include a clear description of the undesired behavior. A test case that exhibits the bug or maybe even patch fixing it, would too be of course very useful.

Suggestions on improving library would be also more than welcome. Please see Hacking, for further information.

Please direct bug reports and eventual patches to [email protected] mailing list. For suggestions regarding improvements and other libmatheval related conversation use author e-mail address [email protected].


Next: , Previous: Bugs, Up: Top

6 Rationale and history

The library is developed as a back-end for “Numerical Analysis” course taught during 1999/2000, 2000/2001 and 2001/2002 school years at Department of Mathematics, University of Belgrade. Most numerical libraries (library accompanying “Numerical Recipes” book most notably example) are asking programmer to write corresponding C code when it comes to evaluate mathematical functions. It seemed to me that it would be more appropriate (well, at least for above mentioned course) to have library that will make possible to specify functions as strings and then have them evaluated for given variable values, so I wrote first version of library during November 1999. Fortran interface is added to the library later; during January 2001 interface for Pacific Sierra VAST Fortran 90 translator was implemented and during September 2001 it was replaced by interface for Intel Fortran 90 compiler 1. This library eventually went into rather stable state and was tested by number of other programs implementing various numerical methods and developed for the same course.

After completing engagement with this course, I thought it may be interesting for someone else to use this code and decided to make it publicly available. So, having some spare time during June 2002, I re-wrote whole library in preparation for public release, now employing simpler overall design and also using GNU auto-tools and what else was necessary according to GNU guidelines. The benefit is that final product looks much better now (well, at least to me and at least at the very moment of this writing), the drawback is that code is not thoroughly tested again. But certainly author would be more than happy to further improve and maintain it. Please see Bugs, for contact information.

The library source code was hosted on Savannah (http://savannah.gnu.org/) since Septembar 2002. In September 2003, library officially became part of GNU project.


Next: , Previous: Rationale and history, Up: Top

7 GNU Free Documentation License

                        Version 1.1, March 2000
     Copyright (C) 2000 Free Software Foundation, Inc.
     51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
     
     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

  0. PREAMBLE

     The purpose of this License is to make a manual, textbook, or other
     written document "free" in the sense of freedom: to assure everyone
     the effective freedom to copy and redistribute it, with or without
     modifying it, either commercially or noncommercially.  Secondarily,
     this License preserves for the author and publisher a way to get
     credit for their work, while not being considered responsible for
     modifications made by others.

     This License is a kind of "copyleft", which means that derivative
     works of the document must themselves be free in the same sense.
     It complements the GNU General Public License, which is a copyleft
     license designed for free software.

     We have designed this License in order to use it for manuals for
     free software, because free software needs free documentation: a
     free program should come with manuals providing the same freedoms
     that the software does.  But this License is not limited to
     software manuals; it can be used for any textual work, regardless
     of subject matter or whether it is published as a printed book.
     We recommend this License principally for works whose purpose is
     instruction or reference.

  1. APPLICABILITY AND DEFINITIONS

     This License applies to any manual or other work that contains a
     notice placed by the copyright holder saying it can be distributed
     under the terms of this License.  The "Document", below, refers to
     any such manual or work.  Any member of the public is a licensee,
     and is addressed as "you".

     A "Modified Version" of the Document means any work containing the
     Document or a portion of it, either copied verbatim, or with
     modifications and/or translated into another language.

     A "Secondary Section" is a named appendix or a front-matter
     section of the Document that deals exclusively with the
     relationship of the publishers or authors of the Document to the
     Document's overall subject (or to related matters) and contains
     nothing that could fall directly within that overall subject.
     (For example, if the Document is in part a textbook of
     mathematics, a Secondary Section may not explain any mathematics.)
     The relationship could be a matter of historical connection with
     the subject or with related matters, or of legal, commercial,
     philosophical, ethical or political position regarding them.

     The "Invariant Sections" are certain Secondary Sections whose
     titles are designated, as being those of Invariant Sections, in
     the notice that says that the Document is released under this
     License.

     The "Cover Texts" are certain short passages of text that are
     listed, as Front-Cover Texts or Back-Cover Texts, in the notice
     that says that the Document is released under this License.

     A "Transparent" copy of the Document means a machine-readable copy,
     represented in a format whose specification is available to the
     general public, whose contents can be viewed and edited directly
     and straightforwardly with generic text editors or (for images
     composed of pixels) generic paint programs or (for drawings) some
     widely available drawing editor, and that is suitable for input to
     text formatters or for automatic translation to a variety of
     formats suitable for input to text formatters.  A copy made in an
     otherwise Transparent file format whose markup has been designed
     to thwart or discourage subsequent modification by readers is not
     Transparent.  A copy that is not "Transparent" is called "Opaque".

     Examples of suitable formats for Transparent copies include plain
     ASCII without markup, Texinfo input format, LaTeX input format,
     SGML or XML using a publicly available DTD, and
     standard-conforming simple HTML designed for human modification.
     Opaque formats include PostScript, PDF, proprietary formats that
     can be read and edited only by proprietary word processors, SGML
     or XML for which the DTD and/or processing tools are not generally
     available, and the machine-generated HTML produced by some word
     processors for output purposes only.

     The "Title Page" means, for a printed book, the title page itself,
     plus such following pages as are needed to hold, legibly, the
     material this License requires to appear in the title page.  For
     works in formats which do not have any title page as such, "Title
     Page" means the text near the most prominent appearance of the
     work's title, preceding the beginning of the body of the text.

  2. VERBATIM COPYING

     You may copy and distribute the Document in any medium, either
     commercially or noncommercially, provided that this License, the
     copyright notices, and the license notice saying this License
     applies to the Document are reproduced in all copies, and that you
     add no other conditions whatsoever to those of this License.  You
     may not use technical measures to obstruct or control the reading
     or further copying of the copies you make or distribute.  However,
     you may accept compensation in exchange for copies.  If you
     distribute a large enough number of copies you must also follow
     the conditions in section 3.

     You may also lend copies, under the same conditions stated above,
     and you may publicly display copies.

  3. COPYING IN QUANTITY

     If you publish printed copies of the Document numbering more than
     100, and the Document's license notice requires Cover Texts, you
     must enclose the copies in covers that carry, clearly and legibly,
     all these Cover Texts: Front-Cover Texts on the front cover, and
     Back-Cover Texts on the back cover.  Both covers must also clearly
     and legibly identify you as the publisher of these copies.  The
     front cover must present the full title with all words of the
     title equally prominent and visible.  You may add other material
     on the covers in addition.  Copying with changes limited to the
     covers, as long as they preserve the title of the Document and
     satisfy these conditions, can be treated as verbatim copying in
     other respects.

     If the required texts for either cover are too voluminous to fit
     legibly, you should put the first ones listed (as many as fit
     reasonably) on the actual cover, and continue the rest onto
     adjacent pages.

     If you publish or distribute Opaque copies of the Document
     numbering more than 100, you must either include a
     machine-readable Transparent copy along with each Opaque copy, or
     state in or with each Opaque copy a publicly-accessible
     computer-network location containing a complete Transparent copy
     of the Document, free of added material, which the general
     network-using public has access to download anonymously at no
     charge using public-standard network protocols.  If you use the
     latter option, you must take reasonably prudent steps, when you
     begin distribution of Opaque copies in quantity, to ensure that
     this Transparent copy will remain thus accessible at the stated
     location until at least one year after the last time you
     distribute an Opaque copy (directly or through your agents or
     retailers) of that edition to the public.

     It is requested, but not required, that you contact the authors of
     the Document well before redistributing any large number of
     copies, to give them a chance to provide you with an updated
     version of the Document.

  4. MODIFICATIONS

     You may copy and distribute a Modified Version of the Document
     under the conditions of sections 2 and 3 above, provided that you
     release the Modified Version under precisely this License, with
     the Modified Version filling the role of the Document, thus
     licensing distribution and modification of the Modified Version to
     whoever possesses a copy of it.  In addition, you must do these
     things in the Modified Version:

       A. Use in the Title Page (and on the covers, if any) a title
          distinct from that of the Document, and from those of
          previous versions (which should, if there were any, be listed
          in the History section of the Document).  You may use the
          same title as a previous version if the original publisher of
          that version gives permission.

       B. List on the Title Page, as authors, one or more persons or
          entities responsible for authorship of the modifications in
          the Modified Version, together with at least five of the
          principal authors of the Document (all of its principal
          authors, if it has less than five).

       C. State on the Title page the name of the publisher of the
          Modified Version, as the publisher.

       D. Preserve all the copyright notices of the Document.

       E. Add an appropriate copyright notice for your modifications
          adjacent to the other copyright notices.

       F. Include, immediately after the copyright notices, a license
          notice giving the public permission to use the Modified
          Version under the terms of this License, in the form shown in
          the Addendum below.

       G. Preserve in that license notice the full lists of Invariant
          Sections and required Cover Texts given in the Document's
          license notice.

       H. Include an unaltered copy of this License.

       I. Preserve the section entitled "History", and its title, and
          add to it an item stating at least the title, year, new
          authors, and publisher of the Modified Version as given on
          the Title Page.  If there is no section entitled "History" in
          the Document, create one stating the title, year, authors,
          and publisher of the Document as given on its Title Page,
          then add an item describing the Modified Version as stated in
          the previous sentence.

       J. Preserve the network location, if any, given in the Document
          for public access to a Transparent copy of the Document, and
          likewise the network locations given in the Document for
          previous versions it was based on.  These may be placed in
          the "History" section.  You may omit a network location for a
          work that was published at least four years before the
          Document itself, or if the original publisher of the version
          it refers to gives permission.

       K. In any section entitled "Acknowledgments" or "Dedications",
          preserve the section's title, and preserve in the section all
          the substance and tone of each of the contributor
          acknowledgments and/or dedications given therein.

       L. Preserve all the Invariant Sections of the Document,
          unaltered in their text and in their titles.  Section numbers
          or the equivalent are not considered part of the section
          titles.

       M. Delete any section entitled "Endorsements".  Such a section
          may not be included in the Modified Version.

       N. Do not retitle any existing section as "Endorsements" or to
          conflict in title with any Invariant Section.

     If the Modified Version includes new front-matter sections or
     appendices that qualify as Secondary Sections and contain no
     material copied from the Document, you may at your option
     designate some or all of these sections as invariant.  To do this,
     add their titles to the list of Invariant Sections in the Modified
     Version's license notice.  These titles must be distinct from any
     other section titles.

     You may add a section entitled "Endorsements", provided it contains
     nothing but endorsements of your Modified Version by various
     parties--for example, statements of peer review or that the text
     has been approved by an organization as the authoritative
     definition of a standard.

     You may add a passage of up to five words as a Front-Cover Text,
     and a passage of up to 25 words as a Back-Cover Text, to the end
     of the list of Cover Texts in the Modified Version.  Only one
     passage of Front-Cover Text and one of Back-Cover Text may be
     added by (or through arrangements made by) any one entity.  If the
     Document already includes a cover text for the same cover,
     previously added by you or by arrangement made by the same entity
     you are acting on behalf of, you may not add another; but you may
     replace the old one, on explicit permission from the previous
     publisher that added the old one.

     The author(s) and publisher(s) of the Document do not by this
     License give permission to use their names for publicity for or to
     assert or imply endorsement of any Modified Version.

  5. COMBINING DOCUMENTS

     You may combine the Document with other documents released under
     this License, under the terms defined in section 4 above for
     modified versions, provided that you include in the combination
     all of the Invariant Sections of all of the original documents,
     unmodified, and list them all as Invariant Sections of your
     combined work in its license notice.

     The combined work need only contain one copy of this License, and
     multiple identical Invariant Sections may be replaced with a single
     copy.  If there are multiple Invariant Sections with the same name
     but different contents, make the title of each such section unique
     by adding at the end of it, in parentheses, the name of the
     original author or publisher of that section if known, or else a
     unique number.  Make the same adjustment to the section titles in
     the list of Invariant Sections in the license notice of the
     combined work.

     In the combination, you must combine any sections entitled
     "History" in the various original documents, forming one section
     entitled "History"; likewise combine any sections entitled
     "Acknowledgments", and any sections entitled "Dedications".  You
     must delete all sections entitled "Endorsements."

  6. COLLECTIONS OF DOCUMENTS

     You may make a collection consisting of the Document and other
     documents released under this License, and replace the individual
     copies of this License in the various documents with a single copy
     that is included in the collection, provided that you follow the
     rules of this License for verbatim copying of each of the
     documents in all other respects.

     You may extract a single document from such a collection, and
     distribute it individually under this License, provided you insert
     a copy of this License into the extracted document, and follow
     this License in all other respects regarding verbatim copying of
     that document.

  7. AGGREGATION WITH INDEPENDENT WORKS

     A compilation of the Document or its derivatives with other
     separate and independent documents or works, in or on a volume of
     a storage or distribution medium, does not as a whole count as a
     Modified Version of the Document, provided no compilation
     copyright is claimed for the compilation.  Such a compilation is
     called an "aggregate", and this License does not apply to the
     other self-contained works thus compiled with the Document, on
     account of their being thus compiled, if they are not themselves
     derivative works of the Document.

     If the Cover Text requirement of section 3 is applicable to these
     copies of the Document, then if the Document is less than one
     quarter of the entire aggregate, the Document's Cover Texts may be
     placed on covers that surround only the Document within the
     aggregate.  Otherwise they must appear on covers around the whole
     aggregate.

  8. TRANSLATION

     Translation is considered a kind of modification, so you may
     distribute translations of the Document under the terms of section
     4.  Replacing Invariant Sections with translations requires special
     permission from their copyright holders, but you may include
     translations of some or all Invariant Sections in addition to the
     original versions of these Invariant Sections.  You may include a
     translation of this License provided that you also include the
     original English version of this License.  In case of a
     disagreement between the translation and the original English
     version of this License, the original English version will prevail.

  9. TERMINATION

     You may not copy, modify, sublicense, or distribute the Document
     except as expressly provided for under this License.  Any other
     attempt to copy, modify, sublicense or distribute the Document is
     void, and will automatically terminate your rights under this
     License.  However, parties who have received copies, or rights,
     from you under this License will not have their licenses
     terminated so long as such parties remain in full compliance.

 10. FUTURE REVISIONS OF THIS LICENSE

     The Free Software Foundation may publish new, revised versions of
     the GNU Free Documentation License from time to time.  Such new
     versions will be similar in spirit to the present version, but may
     differ in detail to address new problems or concerns.  See
     `http://www.gnu.org/copyleft/'.

     Each version of the License is given a distinguishing version
     number.  If the Document specifies that a particular numbered
     version of this License "or any later version" applies to it, you
     have the option of following the terms and conditions either of
     that specified version or of any later version that has been
     published (not as a draft) by the Free Software Foundation.  If
     the Document does not specify a version number of this License,
     you may choose any version ever published (not as a draft) by the
     Free Software Foundation.

ADDENDUM: How to use this License for your documents
----------------------------------------------------

  To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:

       Copyright (C)  YEAR  YOUR NAME.
       Permission is granted to copy, distribute and/or modify this document
       under the terms of the GNU Free Documentation License, Version 1.1
       or any later version published by the Free Software Foundation;
       with the Invariant Sections being LIST THEIR TITLES, with the
       Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST.
       A copy of the license is included in the section entitled ``GNU
       Free Documentation License''.

  If you have no Invariant Sections, write "with no Invariant Sections"
instead of saying which ones are invariant.  If you have no Front-Cover
Texts, write "no Front-Cover Texts" instead of "Front-Cover Texts being
LIST"; likewise for Back-Cover Texts.

  If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of
free software license, such as the GNU General Public License, to
permit their use in free software.


Previous: Copying, Up: Top

Index

Table of Contents


Footnotes

[1] That was in turn replaced by interface for GNU Fortran 77 compiler in order to meet requirement that no GNU project should require use of non-free software