GNU MCSim User’s Manual

Next: , Previous: , Up: (Dir)   [Contents][Index]

Top

GNU MCSim manual, version 6.2.0

GNU MCSim is a general purpose modeling and simulation program which can performs "standard" or "Markov chain" Monte Carlo simulations. It allows you to specify a set of linear or nonlinear algebraic equations or ordinary differential equations. They are solved numerically using parameter values you choose or parameter values sampled from statistical distributions. Simulation outputs can be compared to experimental data for Bayesian parameter estimation (model calibration).


Next: , Previous: , Up: Top   [Contents][Index]

Table of Contents

Table of Contents


Next: , Previous: , Up: Top   [Contents][Index]

1 Software and Documentation Licenses

1.1 Software license

GNU MCSim is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

1.2 Documentation license


The GNU Free Documentation License

Version 1.2, November 2002

Copyright © 2000,2001,2002 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA  02110-1301, USA

Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.

  1. PREAMBLE

    The purpose of this License is to make a manual, textbook, or other functional and useful document free in the sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to get credit for their work, while not being considered responsible for modifications made by others.

    This License is a kind of “copyleft”, which means that derivative works of the document must themselves be free in the same sense. It complements the GNU General Public License, which is a copyleft license designed for free software.

    We have designed this License in order to use it for manuals for free software, because free software needs free documentation: a free program should come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction or reference.

  2. APPLICABILITY AND DEFINITIONS

    This License applies to any manual or other work, in any medium, that contains a notice placed by the copyright holder saying it can be distributed under the terms of this License. Such a notice grants a world-wide, royalty-free license, unlimited in duration, to use that work under the conditions stated herein. The “Document”, below, refers to any such manual or work. Any member of the public is a licensee, and is addressed as “you”. You accept the license if you copy, modify or distribute the work in a way requiring permission under copyright law.

    A “Modified Version” of the Document means any work containing the Document or a portion of it, either copied verbatim, or with modifications and/or translated into another language.

    A “Secondary Section” is a named appendix or a front-matter section of the Document that deals exclusively with the relationship of the publishers or authors of the Document to the Document’s overall subject (or to related matters) and contains nothing that could fall directly within that overall subject. (Thus, if the Document is in part a textbook of mathematics, a Secondary Section may not explain any mathematics.) The relationship could be a matter of historical connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or political position regarding them.

    The “Invariant Sections” are certain Secondary Sections whose titles are designated, as being those of Invariant Sections, in the notice that says that the Document is released under this License. If a section does not fit the above definition of Secondary then it is not allowed to be designated as Invariant. The Document may contain zero Invariant Sections. If the Document does not identify any Invariant Sections then there are none.

    The “Cover Texts” are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document is released under this License. A Front-Cover Text may be at most 5 words, and a Back-Cover Text may be at most 25 words.

    A “Transparent” copy of the Document means a machine-readable copy, represented in a format whose specification is available to the general public, that is suitable for revising the document straightforwardly with generic text editors or (for images composed of pixels) generic paint programs or (for drawings) some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text formatters. A copy made in an otherwise Transparent file format whose markup, or absence of markup, has been arranged to thwart or discourage subsequent modification by readers is not Transparent. An image format is not Transparent if used for any substantial amount of text. A copy that is not “Transparent” is called “Opaque”.

    Examples of suitable formats for Transparent copies include plain ASCII without markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple HTML, PostScript or PDF designed for human modification. Examples of transparent image formats include PNG, XCF and JPG. Opaque formats include proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated HTML, PostScript or PDF produced by some word processors for output purposes only.

    The “Title Page” means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, “Title Page” means the text near the most prominent appearance of the work’s title, preceding the beginning of the body of the text.

    A section “Entitled XYZ” means a named subunit of the Document whose title either is precisely XYZ or contains XYZ in parentheses following text that translates XYZ in another language. (Here XYZ stands for a specific section name mentioned below, such as “Acknowledgements”, “Dedications”, “Endorsements”, or “History”.) To “Preserve the Title” of such a section when you modify the Document means that it remains a section “Entitled XYZ” according to this definition.

    The Document may include Warranty Disclaimers next to the notice which states that this License applies to the Document. These Warranty Disclaimers are considered to be included by reference in this License, but only as regards disclaiming warranties: any other implication that these Warranty Disclaimers may have is void and has no effect on the meaning of this License.

  3. VERBATIM COPYING

    You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3.

    You may also lend copies, under the same conditions stated above, and you may publicly display copies.

  4. COPYING IN QUANTITY

    If you publish printed copies (or copies in media that commonly have printed covers) of the Document, numbering more than 100, and the Document’s license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects.

    If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed (as many as fit reasonably) on the actual cover, and continue the rest onto adjacent pages.

    If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a computer-network location from which the general network-using public has access to download using public-standard network protocols a complete Transparent copy of the Document, free of added material. If you use the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public.

    It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance to provide you with an updated version of the Document.

  5. MODIFICATIONS

    You may copy and distribute a Modified Version of the Document under the conditions of sections 2 and 3 above, provided that you release the Modified Version under precisely this License, with the Modified Version filling the role of the Document, thus licensing distribution and modification of the Modified Version to whoever possesses a copy of it. In addition, you must do these things in the Modified Version:

    1. Use in the Title Page (and on the covers, if any) a title distinct from that of the Document, and from those of previous versions (which should, if there were any, be listed in the History section of the Document). You may use the same title as a previous version if the original publisher of that version gives permission.
    2. List on the Title Page, as authors, one or more persons or entities responsible for authorship of the modifications in the Modified Version, together with at least five of the principal authors of the Document (all of its principal authors, if it has fewer than five), unless they release you from this requirement.
    3. State on the Title page the name of the publisher of the Modified Version, as the publisher.
    4. Preserve all the copyright notices of the Document.
    5. Add an appropriate copyright notice for your modifications adjacent to the other copyright notices.
    6. Include, immediately after the copyright notices, a license notice giving the public permission to use the Modified Version under the terms of this License, in the form shown in the Addendum below.
    7. Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the Document’s license notice.
    8. Include an unaltered copy of this License.
    9. Preserve the section Entitled “History”, Preserve its Title, and add to it an item stating at least the title, year, new authors, and publisher of the Modified Version as given on the Title Page. If there is no section Entitled “History” in the Document, create one stating the title, year, authors, and publisher of the Document as given on its Title Page, then add an item describing the Modified Version as stated in the previous sentence.
    10. Preserve the network location, if any, given in the Document for public access to a Transparent copy of the Document, and likewise the network locations given in the Document for previous versions it was based on. These may be placed in the “History” section. You may omit a network location for a work that was published at least four years before the Document itself, or if the original publisher of the version it refers to gives permission.
    11. For any section Entitled “Acknowledgements” or “Dedications”, Preserve the Title of the section, and preserve in the section all the substance and tone of each of the contributor acknowledgements and/or dedications given therein.
    12. Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers or the equivalent are not considered part of the section titles.
    13. Delete any section Entitled “Endorsements”. Such a section may not be included in the Modified Version.
    14. Do not retitle any existing section to be Entitled “Endorsements” or to conflict in title with any Invariant Section.
    15. Preserve any Warranty Disclaimers.

    If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modified Version’s license notice. These titles must be distinct from any other section titles.

    You may add a section Entitled “Endorsements”, provided it contains nothing but endorsements of your Modified Version by various parties—for example, statements of peer review or that the text has been approved by an organization as the authoritative definition of a standard.

    You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one.

    The author(s) and publisher(s) of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement of any Modified Version.

  6. COMBINING DOCUMENTS

    You may combine the Document with other documents released under this License, under the terms defined in section 4 above for modified versions, provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodified, and list them all as Invariant Sections of your combined work in its license notice, and that you preserve all their Warranty Disclaimers.

    The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant Sections in the license notice of the combined work.

    In the combination, you must combine any sections Entitled “History” in the various original documents, forming one section Entitled “History”; likewise combine any sections Entitled “Acknowledgements”, and any sections Entitled “Dedications”. You must delete all sections Entitled “Endorsements.”

  7. COLLECTIONS OF DOCUMENTS

    You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects.

    You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document.

  8. AGGREGATION WITH INDEPENDENT WORKS

    A compilation of the Document or its derivatives with other separate and independent documents or works, in or on a volume of a storage or distribution medium, is called an “aggregate” if the copyright resulting from the compilation is not used to limit the legal rights of the compilation’s users beyond what the individual works permit. When the Document is included in an aggregate, this License does not apply to the other works in the aggregate which are not themselves derivative works of the Document.

    If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is less than one half of the entire aggregate, the Document’s Cover Texts may be placed on covers that bracket the Document within the aggregate, or the electronic equivalent of covers if the Document is in electronic form. Otherwise they must appear on printed covers that bracket the whole aggregate.

  9. TRANSLATION

    Translation is considered a kind of modification, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition to the original versions of these Invariant Sections. You may include a translation of this License, and all the license notices in the Document, and any Warranty Disclaimers, provided that you also include the original English version of this License and the original versions of those notices and disclaimers. In case of a disagreement between the translation and the original version of this License or a notice or disclaimer, the original version will prevail.

    If a section in the Document is Entitled “Acknowledgements”, “Dedications”, or “History”, the requirement (section 4) to Preserve its Title (section 1) will typically require changing the actual title.

  10. TERMINATION

    You may not copy, modify, sublicense, or distribute the Document except as expressly provided for under this License. Any other attempt to copy, modify, sublicense or distribute the Document is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

  11. FUTURE REVISIONS OF THIS LICENSE

    The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. See http://www.gnu.org/copyleft/.

    Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License “or any later version” applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published (not as a draft) by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published (not as a draft) by the Free Software Foundation.


Next: , Previous: , Up: Top   [Contents][Index]

2 Overview

GNU MCSim is a simulation and statistical inference tool for algebraic or differential equation systems. Other programs, such as GNU Octave, have been created to the same end. Still, most available tools are not optimal for performing computer intensive and sophisticated Monte Carlo analyses. GNU MCSim was created specifically to this end: to perform Monte Carlo analyses in an optimized, and easy to maintain environment. The software consists in two pieces, a model generator and a simulation engine:

- The model generator, "mod", was created to facilitate structural model definition and maintenance, while keeping execution time short. You code your model using a simplified syntax and mod translates it in C.

- The simulation engine is a set of routines which are linked to your model during compilation to produce executable code. After that you can run simulations of your model under a variety of conditions, specify an associated statistical model, and perform simulations.

2.1 General procedure

Model building and simulation proceeds in four stages:

  1. You create with any text editor (e.g., emacs) a model description file. The reference section on mod, later in this manual gives you the syntax to use (see Writing and Compiling Structural Models). This syntax allows you to describe the model variables, parameters, equations, inputs and outputs in a C-like fashion without having you to actually know how to write a C program.
  2. You instruct the model generator, mod, to preprocess your structural model description file. Mod creates a C file, called model.c.
  3. You compile and link the newly created model.c file together with a library containing the other C routines (or with the other C files of the mcsim/sim directory). GNU MCSim C code is standard, so you should be able to compile it with any standard C compiler, for example GNU gcc. After compiling and linking, an executable simulation program is created, specific of your particular model. These preprocessing and compilation steps can be performed in Unix with a single shell command makemcsim (in which case, the model.c is created only temporarily and erased afterward). This produces the most efficient code for your particular machine.
  4. You then write any number of simulation specification files and run them with the compiled mcsim program. These simulation files describe the kind of simulation to run (simple simulations, Monte Carlo etc.), various settings for the integration algorithm if needed, and a description of one or several simulation conditions (eventually with a statistical model and data to fit) (see Running Simulations). The simulation output is written to standard ASCII files.

Little or no knowledge of computer programming is required, unless you want to tailor the program to special needs, beyond what is described in this manual (in which case you may want to contact us).

Under Unix, a graphical user interface written in Tcl/Tk, XMCSim (called by the command xmcsim), is also provided. This menu-driven interface automatizes the compilation and running tasks. It also offers a convenient interface to 2-D and 3-D plotting of the simulation results.

2.2 Types of simulations

Five types of simulations are available:

2.3 Major changes introduced with version 5.4.0

2.4 Major changes introduced with version 5.5.0

2.5 Major changes introduced with version 5.6.0

2.6 Major changes introduced with version 6.0.0

In mod:

In sim:

2.7 Major changes introduced with version 6.1.0

In sim:

2.8 Major changes introduced with version 6.2.0

In mod:

In sim:

2.9 Coming soon

In sim:


Next: , Previous: , Up: Top   [Contents][Index]

3 Installation

3.1 System requirements

GNU MCSim is written in ANSI-standard C language. We are distributing the source code and you should be able to compile it for any system, provided you have an ANSI C compliant compiler.

Starting with version 5.0.0 GNU MCSim is using a few routines from the GNU Scientific Library (libgsl). We recommend that you install version 1.5 (or higher) of the shared GSL library, gslcblas library, and GSL include files on your system. Otherwise, some features (the TruncInvGamma density, and the “Mersenne twister” random number generator, see Random Generator) will not be available (you’ll get a error message if you are trying to use them.)

Version 5.4.0 and higher of GNU MCSim can take advantage of (libSBML) to read SBML models. If you choose to install libSBML on your system, we recommend that you use version 3.3.2 (or higher) of libSBML. LibSBML needs an XML parser library (either Expat, Xerces, or libxml2). The Expat library has worked well for us under Linux.

Version 6.2.0 and higher of GNU MCSim can take advantage of (MPI), the message passing protocol, to parallelize Monte Carlo, Setpoints, or MCMC simulations on multiprocessor architectures. You will need to have a MPI library installed on your system.

On any system we recommend the GNU gcc compiler (freeware). The automated installation script checks for the availability on your system of the tools needed for compilation and proper running of the software. It should warn you of missing component and eventually adapt the installation to your needs (for example by installing the package locally if you do not have superuser’s priviledges).

To run the graphical user interface XMCsim, you need a GNU/Linux or Unix system with "XWindows", "Tcl/Tk" and "wish" installed.

3.2 Distribution

GNU MCSim source code is available on Internet through:

- http://savannah.gnu.org/projects/mcsim.

Packaged distributions are available at:

- http://ftp.gnu.org/gnu/mcsim,

- http://www.gnu.org/software/mcsim,

and mirror sites of the GNU project.

Three mailing lists are available for GNU MCSim users:

General info on GNU MCSim is broadcasted through:

- http://lists.gnu.org/archive/html/info-mcsim

You can subscribe to the info list by going to:

- http://lists.gnu.org/mailman/listinfo/info-mcsim.

You can request help from us, and from other GNU MCSim users, by sending email to:

- [email protected]

(see http://lists.gnu.org/mailman/listinfo/help-mcsim for subscribing).

Help archives are found at:

- http://news.gmane.org/gmane.comp.gnu.mcsim,

- http://lists.gnu.org/archive/html/help-mcsim.

You can report bugs to us, by sending email to:

- [email protected]

(http://lists.gnu.org/mailman/listinfo/bug-mcsim for subscribing).

Bugs archives are located at:

- http://news.gmane.org/gmane.comp.gnu.mcsim.bugs,

- http://lists.gnu.org/archive/html/bug-mcsim.

3.3 Machine-specific installation

3.3.1 Unix and GNU/Linux operating systems

To install on a Unix or GNU/Linux machine, download (in binary mode) the distributed archive file to your machine. Place it in a directory where there is no existing mcsim subdirectory that could be erased (make sure you check that). Decompress the archive with GNU gunzip (gunzip <archive-name>.tar.gz). Untar the decompressed archive with tar (tar xf <archive-name>.tar) (do man tar for further help). Move to the mcsim directory just created and issue the following commands:

./configure
make
make check

The first command above checks for the availability of the tools needed for installation and proper running of the software. The second compiles the mod program and the dynamic libmcsim.so library and eventually compiles this manual in various formats. The third checks whether the software is running and producing meaningful results in test cases. In case of error messages, don’t panic: check the actual differences between the culprit output file and the file sim.out produced by the checking. Small differences may occur from different machine precision. This can happen for random numbers, in which case the Markov chain simulations (MCMC) can diverge greatly after a while.

If you are logged in as "root" or have sufficient access rights, you can then install the software in common directories in /usr by typing at the shell prompt:

make install

If this system-wide installation is successful the executable files mod, makemcsim, xmcsim are installed in /usr/local/bin. The library libmcsim is placed in /usr/local/lib. A copy of the mcsim source directory (with the mod, sim, doc, examples, and xmcsim subdirectories) is placed in /usr/local/share. If you have the GNU info system available, an mcsim node is added to the main info menu, so that info mcsim will show you this manual. Finally, a symbolic link to /usr/local/share/mcsim/doc, which contains the documentation files and this manual (if it was generated), is created as /usr/share/doc/mcsim.

If you do not have the necessary access rights and want to install GNU MCSim in a directory such as /home/me, type:

./configure prefix=/home/me

This will copy or move mod, makemcsim, and xmcsim in a /bin directory in the /home/me directory, creating it if necessary. The library libmcsim.so will be moved to the /home/me/lib directory, etc.

If MPI is available on your system, parallelization of Monte Carlo runs will be enabled by default. To force the configure script to ignore MPI, you should type:

./configure --with-mpi=no

See also the README and INSTALL text files located in the top directory of the distribution.

On certain platforms (Linux...), you will also need to do one of the following:
1) run ’ldconfig’ (see the man page if this is unfamiliar)
2) set the LD_LIBRARY_PATH (or equivalent) environment variable to contain the path "/usr/local/lib" or whatever you set so that programs can find the libSBML library at run-time.

3.3.2 Other operating systems

Under other operating systems (Windows, etc.) or if everything else fails you should be able to both uncompress and untar the archive with widely distributed archiving tools. Refer to the documentation of your C compiler to create an executable mod file from the source code files (getopt.c, lex.c, lexerr.c, lexfn.c, mod.c, modd.c, modi.c, modiSBML.c, modiSBML2.c, modo.c, strutil.c) provided in the mod directory. If you want to process SBML models it is best to install the libSBML library first. You would then compile mod with the HAVE_LIBSBML flag defined (option -DHAVE_LIBSBML) and link with the library (using the -lsbml directive). Place then the executable mod on your command path.

The sim directory contains all the source files (delays.c, getopt.c, lex.c, lexerr.c, lexfn.c, list.c, lsodes1.c, lsodes2.c, matutil.c, matutilo.c, mh.c, modelu.c, optdsign.c, random.c, sim.c, simi.c, siminit.c, simmonte.c, simo.c, strutil.c, yourcode.c) to create a dynamic library or a set of objects to link with the model.c files generated by mod after processing your models. Compilation also requires reference to the config.h file sitting in the main folder (one level above the sim directory). The -I.. option should make the compiler aware of the correct location of config.h. Alternatively, config.h can be copied into the sim directory to make the package complete (apart of model.c).

The final product should be an executable able to run your model. Linking with the GNU Scientific Library (gsl) is recommended (but not mandatory. In that case, define the HAVE_LIBGSL flag and link with the -lgsl and -lgslcblas (in that order).

You are now ready to use GNU MCSim. We recommend that you go through the next section of this manual, which walks you through an example of model building and running.


Next: , Previous: , Up: Top   [Contents][Index]

4 Working Through an Example

Several models and simulation specification files are provided with the package as examples (they are in the examples directory. You can try any of them. The linear regression model is particularly simple, but to be more complete we will try here a nonlinear implicit model, specified through differential equations.

Pharmacokinetics models describe the transport and transformation of chemical compounds in the body. These models often include nonlinear first-order differential equations. The following example is taken from our own work on the kinetics of tetrachloroethylene (a solvent) in the human body (Bois et al., 1996; Bois et al., 1990) (see Bibliographic References).

Go to the mcsim/examples/perc directory (installed either locally or by default in usr/share under Unix or GNU/Linux). Open the file perc.model with any text editor (e.g., emacs or vi under Unix). This file is an example of a model definition file. It is also printed at in Appendix the end of this manual (see perc.model). You can use it as a template for your own model, but you should leave it unchanged for now. In that file, the pound signs (#) indicate the start of comments. Notice that the file defines:

This model definition file as a simple syntax, easy to master. It needs to be turned into a C program file before compilation and linking to the other routines (integration, file management etc.) of GNU MCSim. You will use mod for that. First, quit the editor and return to the operating system.

To start mod under Unix just type mod perc.model. After a few seconds, with no error messages if the model definition is syntactically correct, mod announces that the model.c file has been created. It should operate similarly under other operating systems.

The next step is to compile and link together the various C files that will constitute the simulation program for your particular model. Note that each time you want to change an equation in your model you will have to change the model definition file and repeat the steps above. However, changing just parameter values or state initial values does not require recompilation since that can be done through simulation specification files.

To start your GNU MCSim program just type mcsim.perc (if you gave it that name) under Unix. After an introductory banner (telling in particular which model file the program has been compiled with), you are prompted for an input file name: type in perc.lsodes.in (see perc.lsodes.in, to see this file in Appendix), then a space, and then type in the output file name: perc.lsodes.out. After a few seconds or less (depending on your machine) the program announces that it has finished and that the output file is perc.lsodes.out. You can open the output file with any text editor or word processor, you can edit it for input in graphic programs etc.

You can try the various demonstration models provided in the examples directory and observe the output you obtain. You can then start programming you own models and doing simulations. The next sections of this manual reference the syntax for model definition and simulation specifications.


Next: , Previous: , Up: Top   [Contents][Index]

5 Writing and Compiling Structural Models

The model generator, "mod", was created to facilitate structural model definition and maintenance, while keeping short execution time through compilation. This chapter explains how to use mod, and how to code your models using a simplified syntax that mod can translate in C (creating thereby a model.c file).

After compiling and linking of the newly created model.c file together with the other C files of the mcsim/sim directory (or after linking with a dynamic library libmcsim.so), an executable simulation program is created, specific of your particular model. These preprocessing and compilation steps can be performed in Unix with a single shell command makemcsim (in which case, the model.c is created only temporarily and erased after that).

Several examples of model simulation files are included in the mcsim/examples directory. Some of them are reproduced in Appendix (see Examples).


Next: , Up: Writing and Compiling Structural Models   [Contents][Index]

5.1 Using mod to preprocess model description files

The mod program is a stand-alone facility. It takes a model description file in the "user-friendly" format described below (see Syntax of mod files) and creates a C language file model.c which you will compile and link to produce the simulation program. Mod allows the user to define equations for the model, assign default values to parameters or default initial values to model variables, and to initialize them using additional algebraic equations. Mod lets the user create and modify models without having to maintain C code. Under Unix or GNU/Linux, the command line syntax for the mod program is:

mod [input-file [output-file]]

where the brackets indicate that the input and output filenames are optional. If the input filename is not specified, the program will prompt for both. If only the input filename is specified, the output is written by default to the file model.c. Unless you feel like doing some makefile programming, we recommend using this default since the makefile for GNU MCSim assumes the C language model file to have this name. You have to have prepared a text file containing a description of the model following the syntax described in the following (see Syntax of mod files).

The following options are available:

Most error messages given by mod are self-explanatory. Where appropriate, they also give the line number in the model file where the error occurred. Beware, however, of cascades of errors generated as a consequence of a first one; so don’t panic: start by fixing the first one and rerun mod. Note that when using the -R option, care has to be taken to adopt the deSolve code conventions (see the deSolve manual on R CRAN). If you get really stuck you can send a message to the help mailing list (see Installation) or to the authors of this manual.


Next: , Previous: , Up: Writing and Compiling Structural Models   [Contents][Index]

5.2 Using makemcsim to preprocess and compile model files

makemcsim is a Unix sh shell script that further facilitates preprocessing and compilation. You run makemcsim by entering it at the command prompt:

makemcsim [model-file]

where the brackets indicate that the model filename is optional. If a model filename is not specified, the first file having extension .model (by alphabetical order) is used. Makemcsim calls mod if the model file has changed since last compilation, compiles the model.c generated, links it to the shared libmcsim.so library to create an executable mcsim.<root-model-name>. The extension root-model-name corresponds to your model filename (without its last extension if it has one; i.e.,typically, without the .model extension). The model.c file is deleted afterward; if you want to inspect it (for example, if you got error messages from mod), run mod on your model definition file.

Three variants of makemcsim are also available:


Next: , Previous: , Up: Writing and Compiling Structural Models   [Contents][Index]

5.3 Syntax of the model description file

The model description file is a text (ASCII) file that consists of several sections, including global declarations, dynamics specifications (with derivative calculations), model initialization ("scaling"), and output computations. Here is a template for such a file (for further examples see Examples):


# Model description file (this is a comment)
<Declarations of global variables>
Initialize {
  <Equations for initializing or scaling model parameters>
}
Dynamics {
  <Equations for computing derivatives of the state variables>
}
Jacobian {
  <Equation for the Jacobian of the state derivatives>
}
CalcOutputs {
  <Equations for computing output variables>
}
End. # mandatory ending keyword

Initialize, Dynamics, Jacobian and CalcOutputs are reserved keywords and, if used, must appear as shown, followed by the curly braces which delimit each section (see Model initialization; Dynamics section; Output calculations). Please note that at least one of the sections Dynamics or CalcOutputs should be defined, and that Dynamics must be used if the model includes differential equations. Finally the model definition file must have the End keyword at the beggining of a line, eventually preceeded by white spaces or tabs. Text after the End keyword is ignored.


Next: , Up: Syntax of mod files   [Contents][Index]

5.3.1 General syntax

The general syntax of the model description file is as follows:


Next: , Previous: , Up: Syntax of mod files   [Contents][Index]

5.3.2 Declarations of global variables

Commands not specified within the delimiting braces of another section are considered to be global declarations. In the global section, you first declare the state, input, and output variables. There should be at least one state or output variable in your model.

The format for declaring each of these variables is the same, and consists of the keyword States, Inputs or Outputs followed by an equal sign and a list of the variable names enclosed in curly braces as shown here:

States =   {Qb_fat,  # Benzene in the fat
            Qb_bm,   # ...     in the bone marrow
            Qb_liv}; # ...     in the liver and others

Inputs =   {Q_gav,   # Gavage dose
            C_inh};  # Inhalation concentration

Outputs =  {Cb_exp,  # Concentration in expired air
            Cb_ven}; # ...           in venous blood

After being defined, states, inputs and outputs can then be given initial values (constants or expressions). Inputs can also be assigned input functions, described below (see Input functions). Some examples of initialization are shown here:

Qb = 0.1; # Default initial value for state variable Qb

# Input variable assigned a periodic exponential input function
Q = PerExp(1, 60, 0, 1); # Magnitude of 1.0,
                         # period of 60 time units,
                         # T0 in period is 0,
                         # Rate constant is 1.0

If a state, input, or output variable is not explicitly given an initial value, that value will be set to zero by default. Initial values are reset to their specified value by the simulation program at the start of each Simulation (see Simulation sections).

All the other variables are "parameters". Model parameters you want to be able to change in simulation input files should be declared in the global section. For example:

Wind_speed; # (m/s) Local wind speed

Parameters are by default assigned a value of zero. To assign a different nominal values, use the assignment rules given above. For example:

BodyWt = 65.0 + sqrt(15.0); # Weight of the subject (in kg)

All parameters and variables are computed in double precision floating-point format. Initial values should not be such as to cause computation errors in the model equations; this is likely to lead to crashing of the program (so, for example, do not assign a default value of zero to a parameter appearing alone in a denominator). Note that the order of global declarations matters within the global section itself (i.e., parameters and variables should be defined and initialized before being used in assignments of others), but not with respect to other blocks. A parameter defined at the end of the description file can be used in the Dynamics section which may appear at the beginning of the file. Still, such an inverse order should be avoided. For this reason, the format above, where global declarations come first, is strongly suggested to avoid confusing results. Note again that the name IFN, in capital letters, is reserved by the program and should not be used as parameter or variable name. Finally, if a parameter is defined several times, only the first definition is taken into account (a warning is issued, beware of it).


Next: , Previous: , Up: Syntax of mod files   [Contents][Index]

5.3.3 Model types

This section deals with structural models. Statistical models that you setup for model calibration and data analysis are defined in the simulation input files, through statistical distribution functions. They are dealt with later in this manual (see Setting-up statistical models).

GNU MCSim can easily deal with purely algebraic structural models. You do not need to define state variables or a Dynamics section for such models. Simply use input and output variables and parameters and specify the model in the CalcOutputs section. You can use the time variable t if that is natural for your model. If your model does not use t, you will still need to specify "output times" in Print() or PrintStep() statements to obtain outputs: you can use arbitrary times. If you do not use t as "independent" model variable, you will also need do define a Simulation section (see Simulation sections) for each combination of values for the independent variables of your model. This may be clumsy if many values are to be used. In that case, you may want to use the variable t to represent something else than time.

Ordinary differential models, with algebraic components, can be easily setup with GNU MCSim. Use state variables and specify a Dynamics section. Time, t is the integration variable, but here again, t can be used to represent anything you want. For partial differential equations some problems might be solved by implementing line methods (see examples in mcsim/examples/pde1 and mcsim/examples/pde2)...

You can use GNU MCSim for discrete-time dynamic models (or difference models). That is a bit tricky. Assignments in the CalcOutputs section are volatile (not memorized), so the model equations have to be given in a Dynamics section. But the model variables should still be declared as outputs, because they should not be updated by integration. However, you need at least one true differential equation in the Dynamics section, so you should declare a dummy state variable (and assign to its derivative a constant value of zero). You also want the calls to Dynamics to be precisely scheduled, so it is best to use the Euler integration routine (see Integrate() specification) which uses a constant step. Since Euler may call repeatedly Dynamics at any given time, you want to guard against untimely updating... Altogether, we recommend that you examine the example files in the mcsim/examples/discrete directory provided with the source code for GNU MCSim.


Next: , Previous: , Up: Syntax of mod files   [Contents][Index]

5.3.4 Special functions

The following special functions (whose name is case-sensitive) are available to the user for assignment of parameters and variables in the model definition file:

Note: If you have linked Graph_Sampler with GNU Scientific Library (gls), all the above random number generating functions use an extremely long period random number generator: the “Mersenne twister” generator (gsl_rng_mt19937). Otherwise, the random generator used is that of Park and Miller (Barry, 1996; Park and Miller, 1988; Vattulainen et al., 1994) (see Bibliographic References). When using the GNU Scientific Library, the default random generator seed value is 0. When using the native code, it is 314159265.3589793. Those default values can be overridden with the function SetSeed.

Note also that assignment of a random number generating function to a state variable derivative will define a form of stochastic differential equation. GNU MCSim’s integration routines are not particularly suited to the resolution of such equations. If you wish to try it anyway, you may want to consider using the "robust" Euler method (see Integrate() specification).


Next: , Previous: , Up: Syntax of mod files   [Contents][Index]

5.3.5 Input functions

These functions can be used in special assignments, valid only for input variables. Inputs can be initialized to a constant or to a standard mathematical expression, or assigned one of the following input functions:

The arguments of input functions can either be constants or variables. For example, if ‘Mag’ and ‘RateConst’ are defined model parameters, then the input variable ‘Q_in’ can be defined as:

Q_in = PerExp(Mag, 60, 0, RateConst);

In this way the parameters of input functions can, for example, be assigned statistical distributions in Monte Carlo simulations (see Distrib() specification). Variable dependencies are resolved before each simulation specified by a Simulation section (equivalently Experiment) (see Simulation sections).

For each of the periodic functions, a single exposure beginning at time initial-time can be specified by giving an effectively infinite period, e.g. 1e10. The first period starts at the initial time of the simulation.

Note on discontinuities: Magnitudes change exactly at the times given. At a discontinuity, the time point belongs to the NEW time period UNLESS we are at the final time.

Input variables assigned input functions can be combined to give a lot of flexibility (e.g., an input variable can be declared as the sum of others). Separate inputs can also be declared in the global section of the model definition file and combined in the Dynamics (see Dynamics section) and CalcOutputs (see Output calculations) sections.


Next: , Previous: , Up: Syntax of mod files   [Contents][Index]

5.3.6 In line functions

Inline() functions can be placed in the various sections of a model file to introduce standard C code (or whatever) in your models. Text placed between the parentheses of an Inline function will be passed as is to the C compiler. That text can span several lines but its size should not exceed MAX_EQN (defined in lex.h); In case it does, you can increase MAX_EQN (and recompile mod...) or you can split you text between any number of Inline() in a row. It is your responsibility to make sure that the code passed can be compiled without errors!

Example:

Inline( printf("hello/n"); );

You can use C compiler (in fact preprocessor) directives, such #include directives, inside Inline statements, provided that you use the \# escape sequence instead of simply the # character (otherwise it is confused with a GNU MCSim comment and Hell breaks loose).

Example:

Inline( \#include <gsl/gsl_interp.h> );

This can be useful to include large amounts of C code. Note also that the inlined code is likely to be dependent on whether or not you are using the -R option of mod.


Next: , Previous: , Up: Syntax of mod files   [Contents][Index]

5.3.7 Model initialization

The model initialization section begins with the keyword Initialize (the keyword Scale is obsolete but is still understood) and is enclosed in curly braces. The equations given in this section will define a function (subroutine) that will be called by GNU MCSim after the assignments specified in each Simulation section are done (see Simulation sections). They are the last initializations performed. The model file in mcsim/examples/perc gives an example of the use of Initialize (see perc.model, in Appendix).

All model variables and parameters, except inputs, can be changed in this section. Modifications to state variables affect initial values only. In this section, state variables, outputs and parameters (but not input variables) can also appear at the the right-hand side of equations. The integration variable can be accessed if referred to as t

Warning: Assignments to state variables in the Initialize section override the same assignments made in input files.

Additional parameters (to those declared in the global section) may be used within the section. They will be declared as local temporary variables and their scope will be limited to the Initialize section (i.e., their value and existence will be forgotten outside the section).

The dt() operator (see Dynamics section) cannot be used in this section, since derivatives have not yet been computed when the scaling function is called.


Next: , Previous: , Up: Syntax of mod files   [Contents][Index]

5.3.8 Dynamics section

The dynamics specification section begins with the keyword Dynamics and is enclosed in curly braces. The equations given in this section will be called by the integration routines at each integration step. Dynamics must be used if the model includes differential equations.

Additional parameters (to those declared in the global section) may be used for any calculations within the section. They will be declared as local temporary variables. (Note, for example, the use of ‘Cout_fat’ and ‘Cout_wp’ in the perc.model example file). Local variables are not accessible from the simulation program, or from other sections of the model definition file, so don’t try to output them.

Each state variable declared in the global section must have one corresponding differential equation in the Dynamics section. If a differential equation is missing, mod issues an error message such as:

Error: State variable 'Q_foo' has no dynamics.

and no model.c file or executable program will be created.

The derivative of a state variable is defined using the dt() operator, as shown here:

dt(state-variable) '=' constant-value-or-expression ';'

The right-hand side can be any valid C expression, including standard math library calls and the special functions mentioned above (see Special functions). Note that no syntactic check is performed on the library function calls. Their correctness is your responsibility.

The dt() operator can also be used in the right-hand side of equations in the dynamics section to refer to the value of a derivative at that point in the calculations. For example:

dt(Qm_in) = Qmetabolized - dt(Qm_out);

The integration variable (e.g., time) can be accessed if referred to as t, as in:

dt(Qm_in) = Qmetabolized - t;

Output variables can also be made a function of t in the Dynamics section.

Note that while state variables, input variables and model parameters can be used on the right-hand side of equations, they cannot be assigned values in the Dynamics section. If you need a parameter to change with time, you can declare it as an output variable in the global section. Assignments to states, inputs or parameters in this section causes an error message like the following to be issued:

Error: line 48: 'YourParm' used in invalid context.
Parameters cannot be defined in Dynamics{} section.

Note also that, in Dynamics, output variables should be assigned a value or equation before being used. You cannot assume that the value computed during a previous call to the function is valid, because the integrator may have taken too long a time step, for example. The integrator keeps track of state variables only.


Next: , Previous: , Up: Syntax of mod files   [Contents][Index]

5.3.9 Delay differential equations

GNU MCSim’s Lsodes and Euler integrators can solve delay differential equations.

Delay differential equations are equations that depend on past values of the state variables, say at time t-tau instead of at time t.

This is done very easily in GNU MCSim models with the CalcDelay funtion. Its syntax is:

  CalcDelay (<variable>, <delay>);

The variable must be a declared state or output variable. CalcDelay() will return its past value (at time delay). The delay specified must be either a declared parameter or a constant floating point or integer value. For example:

  tau = 100;
  dt (Q1) = k * CalcDelay(Q3, tau);
  dt (Q2) = k * CalcDelay(Q3, 10);

An example of a model using CalcDelay() and input file is given in the example/delay_diff_eqns folder. Note that currently, the CalcDelay() function cannot be used with the -R option for mod (i.e., for use with the deSolve R package).

GNU MCSIm stores required variables past values in a arrays of size MAX_DELAY (equal by default to 1000). If the needed past recall exceeds that capacity you will need to increase the value of MAX_DELAY in the C file delays.c and recompile the library and your model.


Next: , Previous: , Up: Syntax of mod files   [Contents][Index]

5.3.10 Output calculations

The output calculation section begins with the keyword CalcOutputs and is enclosed in curly braces. The equations given in this section will be called by the simulation program at each output time specified by a Print() or PrintStep() statement (see Print() specification, and see PrintStep() specification). In this way, output computations are done efficiently, only when values are to be saved.

Only variables that have been declared with the keyword Outputs, or local temporary variables, can receive assignments in this section. As in the Dynamics section, output variables should be assigned a value or equation before being used. Assignments to other types of variables cause an error message like the following to be issued:

Error: line 56: 'Qb_fat' used in invalid context.
Only output and local variables can be defined in CalcOutputs section.

Any reference to an input or state variable will use the current value (at the time of output). Note that CalcOutputs code is called only on the correct state trajectory, but you cannot reuse past values of outputs in your code, for example forming cumulative sums such as:

a = a + b;

The dt() operator can appear in the right-hand side of equations, and refers to current values of the derivatives (see Dynamics section). Like in the Dynamics section, the integration variable can be accessed if referred to as t, as in:

Qx_out = DQx * t;

Previous: , Up: Syntax of mod files   [Contents][Index]

5.3.11 Comments on style

For your model file to be readable and understandable, it is useful to use a consistent notation style. The example file perc.model tries to follow such a style (see perc.model). For example we suggest that:

These conventions are suggestions only. The key to have a consistent notation that makes sense to you. Consistency is one of the best ways to:

  1. Increase readability, both for others and for yourself. If you have to suspend work for a month or two and then come back to it, the last thing you want is to have to decipher your own file.
  2. Decrease the likelihood of mistakes. If all of the equations are coded with a consistent, logical convention, mistakes stand out more readily.

Last, but not least, do use comments to annotate your code! Also: make sure your comments are accurate and update them when you change your code. In our experience, an enormous number of hours has been wasted in trying to figure out inconsistencies that existed only because of inaccurate comments (e.g., erroneous comments about the reasons for choice of default parameter values). That does not decrease the value of good comments, however...


Next: , Previous: , Up: Writing and Compiling Structural Models   [Contents][Index]

5.4 Reading SBML models and applying a template

To read models written in SBML, you simply need to create a text file of the same format as an MCsim model definition file (comments starting with #, file ending with End, etc.) In that file, you specify a list of one or more SBML model files with the keyword SBMLModels followed by an equal sign and a list of SBML model file names (of maximum size MAX_FILENAMESIZE, 80 characters, as defined in mod.h), enclosed in curly braces, as shown here:

#---------------------------------------------------------
# SBML_List.in
# Use it as "mod SBML_List.in"
#---------------------------------------------------------

SBMLModels = {useID, "default", "C_central.xml", "C_periph.xml"};

End.

The first two tokens, useID and "default", at the very beginning of the list, are optional (but if the appear they must both appear). The first indicates that species are recognized by "IDs" (at the moment this the only possibility, hardly an option indeed, but in the future we would like to be able also to use Names"). The second one gives the name of the default (external) compartment in your SBML files. Here the default is named "default", which works for CellDesigner, but JDesigner, for example, uses "compartment"... The list of files comes after, with the filenames being enclosed with double quotes. There is no restriction about their extension (".xml" is just an example). They just have to be valid filenames.

Give that file as input to mod, by typing in mod SBML_List.in on your shell command line. A model.c file is produced, suitable for further compilation by makemcsim. SBML model files are typically ASCII text files with a xml extension (for examples see mcsim/sim/examples/SBML). SBML Level 1 and Level 2 are recognized (but some features of Level 2 are not yet understood by mod, such as functionDefinition, unit, rateRule and a few others.) Omitted reaction stoichiometries are set to value 1 by default. Compartments are ignored unless a model template for circulating species is given (see below).

If two or more of the SBML files define a same chemical species, mod merges the models: namely, the rate equation for that species will be the sum of the rate equations implied by each model. In fact, mod constructs the rate equations from the reaction descriptions given by the SBML format. State variables and parameters keep the same name after merging, so they should be unique from the start to each SBML model, to avoid confusion.

To automatically extend SBML (level 2) models (e.g., with transport component terms, an example which will be used throughout this part of the manual), a template model can be applied to all the species defined in SBML which are placed in the default compartment (conventionally called compartment), and outside of other compartments whose names are specified by the template itself. Specifically: the template model should define compartments and differential equations terms for the transport of an unspecified species between those compartments (the syntax for that will be described below). For each species placed in SBML outside one of the defined compartments, a differential equations is created for each compartment using the template transport terms. The differentials for the compartments found in both the template and the SBML models will contain both transport and kinetic terms. With the exception of the generic compartment, the SBML models merged can only use the compartments defined by the template (compartment name recognition is case-sensitive). Species placed in SBML inside one of the defined compartments are not transported and stay local to that compartment. Their differentials will contain only the reaction kinetics terms defined by the SBML models. For simplicity, the default initial values of the model state variables (species) specified by the user are ignored and set to zero.

Warning: At the moment, libSBML does not guarantee the type of operands or their format for a division. While 5.4/2.3 will appear correctly as a float division, 5.0/2.0 is likely to be translated in 5/2 which is an integer division in C! It is probably best to use the multiplication by the inverse in that case, but that forces you to check SBML models manually for all divisions...

There might be many applications of the template mechanism, and they are left to the reader to imagine.

The template model to use is specified with PKTemplate keyword, followed by an equal sign and the file name of a template model file (of maximum size MAX_FILENAMESIZE, 80 characters, as defined in mod.h), enclosed in curly braces, like in:

#---------------------------------------------------------
# SBML_List.in
# Use it as "mod SBML_List.in"
#---------------------------------------------------------

PKTemplate = {"input_f/2cpt_PBPK.model"};

SBMLModels = {"C_central.xml", "C_periph.xml"};

End.

The template structure is similar to that of other GNU MCSim models, with two exceptions: First, the variables and parameters which are supposed to apply to several chemical species defined in SBML are preceeded with an underscore (_). Second, the compartments allowed in SBML and for which the template is defined are declared using the keyword Compartment, followed by an equal sign and a list of the compartment names enclosed in curly braces. Here is an example of template file:

#---------------------------------------------------------
# Template for pharmacokinetic modeling
#---------------------------------------------------------

States = {_central, _periph};
Inputs = {_Dose_rate};
Outputs = {_Q_total};
Compartments = {central, peripheral};

# Species-dependent parameters
_PC = 2;
_K_urine;

# Species-independent parameters
V_central;
V_periph;

Initialize { _K_urine = _K_urine * 2; }

Dynamics {
  _Q_rate_c_p = 5 * (_central - _periph / _PC);

  # Central compartment quantity
  _pk_central  = (_Dose_rate - _Q_rate_c_p -
                  _K_urine * _central) / V_central;
  dt(_central) = _pk_central;

  # Peripheral compartment quantity
  _pk_periph  = _Q_rate_c_p / V_periph;
  dt(_periph) = _pk_periph;
 }

CalcOutputs { _Q_total = _central / V_central + _periph / V_periph; }

End.

With that template, each species, say S1, defined in SBML to be outside of the central or peripheral compartments will be cloned to form the state variables S1_central and S1_peripheral. Those will have associated differential equations using specific parameters S1_PC or unspecific ones like V_central. The chemical reactions defined in SBML to take place inside the central or peripheral compartments will be translated into specific terms added to the dt(_central) and dt(_periph) equations.

Warning: the automatic creation of a model by merging SBML files with a template may shuffle the order of the differential equation declarations. Therefore you should not use an already defined dt() term in a subsequent differential equation in the template model.


Previous: , Up: Writing and Compiling Structural Models   [Contents][Index]

5.5 Working with the R package deSolve

GNU MCSim mod model generator can be passed the -R option. For example:

  mod -R perc.model

In that case, the C code produced can be used by the deSolve package of the R statistical software (see http://www.r-project.org/) to perform simulations of your models. The numerical integators provided by deSolve are improved implementations of the lsode family of integrators used by GNU MCSim), and deSolve provides a few more options than GNU MCSim (see the deSolve user manuals). However, if you need raw speed (say, for Markov chain Monte Carlo simulations) GNU MCSim is probably the fastest option.

In addition to producing a model.c file in C language, mod called with the -R option also generates model_inits.R file. That file can be loaded in R and provides the R two functions initParms, initStates and the variable Outputs, which can be handy in R scripts:

An example of R script using GNU MCsim to generate and run a model is given in the example/R folder.


Next: , Previous: , Up: Top   [Contents][Index]

6 Running Simulations

After having your model processed by mod or makemcsim, and obtained an executable mcsim_... file, you are ready to run simulations. For this you need to write simulation files. This chapter explains how to write such files with the proper syntax and how to run the executable program.

You may want to first give a look at the examples given in the mcsim/examples directory. An example file perc.lsodes.in, which works with the perchloroethylene model perc.model, is also given in an Appendix to this manual (see perc.lsodes.in).


Next: , Up: Running Simulations   [Contents][Index]

6.1 Using the compiled program

GNU MCSim provides several types of simulations for the models you create. Simulations are specified in a text file of format similar to that of the model description file.

Assume that your model a.model has been preprocessed and compiled by makemcsim (see Using makemcsim) to generate an executable mcsim_a (if you have renamed the executable file, substitute mcsim_my by the name of your executable in the following). In Unix the command-line syntax to run that executable is simply:

mcsim_a [run-time options] [input-file [output-file]]

where the brackets indicate optional arguments. If no input and output file names are specified, the program will prompt you for them. You must provide an input file name. That file should describe the simulations to perform and specify which outputs should be printed out (see Syntax of simulation files). If you just hit the return key when prompted for the output name, the program will use the name you have specified in the input file, if any, or a default name (see OutputFile() specification). If just one file name is given on the command-line, the program will assume that it specifies the input file. For the output filename, the program will then use the name you have specified in the input file, if any, or a default name.

The following run-time options are available:

Note on parallelized code: If your model has been preprocessed and compiled by makemcsimp (see Using makemcsim) to generate a parallelization-enabled executable mcsim_a, you should run it with a specific wrapper like mpirun:

mpirun -np 50 mcsim_a [run-time options] [input-file [output-file]]

The particular wrapper to use depends on the MPI library installed on your system. In the case of Open MP mpirun, the number of processors to use is specified by the -np option (50 processors in the example above).

When the program starts, it announces which model description file was used to create it. While the input file is read or while simulations are running, some informations will be printed on your computer screen. They can help you check that the input file is correctly interpreted and that the program runs as it should. GNU MCSim can also post error messages, which should be self-explanatory. Where appropriate, they show the line number in the input file where the error occurred. Beware, however, of cascades of errors generated as a consequence of a first one; also errors may be detected after the line in which they really occur and the line number shown will be unhelpful; don’t panic: start by fixing the first error in the input file and rerun your executable. You should not need to recompile your executable, unless you have changed the model itself. If you get really stuck you can send a message to the mailing list "[email protected]" (see Installation) or to the authors of this manual.

The program ends (if everything is fine) by giving you the name of the output file generated. If you want to run the program in batch mode (in the background), you may want to redirect the screen output and error messages; refer for this to the man pages for your shell.


Next: , Previous: , Up: Running Simulations   [Contents][Index]

6.2 Syntax of the simulation definition file

A simulation specification file is a text (ASCII) file that consists of several sections, starting with global specifications and assignments (valid throughout the file), followed by a number of Simulation sections (see Simulation sections), eventually enclosed in Level sections. (The keyword Experiment is now obsolete but can still be used as a synonym for Simulation.)

It is important to note that all simulations are fundamentally dynamic, and that time is the explicit independent variable. There can be time-discontuities in your simulations if a input changes instantaneously (see Input functions). At a discontinuity, the time point belongs to the new time period unless we are at the final time. Current simulation time can be accessed in your model using variable t. It is possible to ignore time and write models which do not consider it, but inputs and outputs of such models will still refer to time. For example, you are required to specify at least one output time to print results from your model, even though time is inconsequent. In that case you can use an arbitrary time or sets of times.

Each Simulation section defines simulation conditions, from an initial time (or whatever the dependent variable represents, see Model types) to a final time. Initial values of the model state variables, parameter values, input variables time-course, and which outputs are to be printed at which times, can all be changed in a given Simulation section.

In simple cases, the general layout of the file is therefore (see also the example file in perc.lsodes.in):


# Input file (text after # are comments)
<Global assignments and specifications>
Simulation {
  <Specifications for first simulation>
}
Simulation {
  <Specifications for second simulation>
}
# Unlimited number of simulation specifications
End. # Mandatory End keyword. Everything after this line is ignored

For Markov chain Monte Carlo simulations (see MCMC() specification), the general layout of the file must include Level sections. Level sections are used to define a hierarchy of statistical dependencies (see Setting-up statistical models). In that case, the general layout of the file is:


# Input file
<Global assignments and specifications>
Level {
  # Up to 10 levels of hierarchy
  Simulation {
    <Specifications and data for first simulation>
  }
  Simulation {
    <Specifications and data for second simulation>
  }
  # Unlimited number of simulation specifications
} # end Level
End. # Mandatory keyword.


Next: , Up: Syntax of simulation files   [Contents][Index]

6.2.1 General input file syntax

The general syntax of the file is the same as that of structural model definition files (see General syntax) except that:

Note that vectors (see Vectors) can be used, as in:

Simulation {
  y[1-10] = 1.00;
  PrintStep (y[1-5],  0, 10, 0.5);
  Print     (y[6-10], 0, 5, 10);
}

At the program start, all model parameters are initialized to the nominal values specified in the model description file. Next, after the input file is read, modifications given in its global section (including random sampling) are applied, then those specified at each Level, and finally any modifications specified by the Simulation sections. Computations specified in the Initialize section of the model definition file are the last initialization statements executed.

Structural changes to the model (e.g., addition of a state, input, output or parameter) cannot be done here and must be done in the model description file. The simulation specification file is read until a mandatory End keyword is reached.


Next: , Previous: , Up: Syntax of simulation files   [Contents][Index]

6.2.2 Input functions (revisited)

Input variables can be assigned all the input functions defined previously (see Input functions). Briefly, these are:

In addition, they can be assigned a Events() specification (see Events() specification). Again, at a discontinuity, the time point belongs to the new time period unless we are at the final time.


Next: , Previous: , Up: Syntax of simulation files   [Contents][Index]

6.2.3 Global specifications

In the global section you can modify, by assignment, the value of already defined state or input model variables or parameters (you cannot assign a value to an output variable). These assignments will be in effect throughout the input file, unless they are overridden later in the file. Here is an exemple of assignment (assuming that x and Pi have been properly defined in the model definition file):

x = 10; # set the initial value if x is a state variable
Pi = 3; # to stop worrying about little decimals...

In the global section, you can also give specifications relevant to all Simulation or Level sections. These specifications are not needed if you just want to perform simple simulations. They should also not appear inside Simulation or Level sections (with the notable exception of Distrib() specifications which can appear inside Level sections). They are used to call for and define the parameters of special computations (e.g., the number of Monte Carlo simulations to run, which sampling distributions to use for a given parameter, the data likelihood, etc.) These specifications are the following:


Next: , Up: Global specifications   [Contents][Index]

OutputFile() specification

The OutputFile() specification allows you to specify a name for the output file of basic simulations. If this specification is not given the name sim.out is used if none has been supplied on the command-line or during the initial dialog. The corresponding syntax is:

OutputFile("<OutputFilename>");

where the character string <OutputFilename>, enclosed in double quotes, should be a valid file name for your operating system.


Next: , Previous: , Up: Global specifications   [Contents][Index]

Integrate() specification

The integrator settings can be changed with the Integrate specification. Three integration routines can be used: Lsodes (which originates from the SLAC Fortran library and is originally based on Gear’s routine) (Gear, 1971b; Gear, 1971a; Press et al., 1989) (see Bibliographic References), Cvodes (from the Sundials library https://computation.llnl.gov/projects/sundials) which may be more stable than Lsodes in difficult cases, and Euler (Press et al., 1989).

The syntax for Lsodes is:

Integrate(Lsodes, <rtol>, <atol>, <method>);

where <rtol> is a floating point scalar specifying the relative error tolerance for each integration step. The floating point scalar <atol> specifies the absolute error tolerance parameter. Those tolerances are used for all state variables. The estimated local error for a state variable y is controlled so as to be roughly less (in magnitude) than rtol*|y| + atol. Thus the local error test passes if, for each state variable, either the absolute error is less than <atol>, or the relative error is less than <rtol>. Set <rtol> to zero for pure absolute error control, and set <atol> to zero for pure relative error control. Caution: actual (global) errors may exceed these local tolerances, so choose them conservatively.

The <method> flag should be 0 (zero) for non-stiff differential systems and 1 or 2 for stiff systems. If you specify <method> 2 you should provide the Jacobian of your differential system (see the “Perc” model in the example folder); otherwise the Jacobian will be computed by numerical differentiation (which is about as fast if the Jacobian is dense). You should try flag 0 or 1 and select the fastest for equal accuracy of output, unless insight from your system leads you to choose one of them a priori. In our experience, a good starting point for <atol> and <rtol> is about 1e-6.

The syntax for Cvodes is:

Integrate(Cvodes, <rtol>, <atol>, <maxsteps>, <maxnef>, <maxcor>,
          <maxncf>, <nlscoef>);

<atol> and <rtol> have the same meaning as for Lsodes, above.

The <maxsteps> is an integer secifying the maximum number of internal steps taken before exiting a Cvodes call; the default value in Sundials is 500. maxnef is an integer specifying the maximum number of error test failures accepted; the default value in Sundials is 7. maxcor is an integer giving the maximum number of nonlinear iterations attempted; the default value in Sundials is 3. maxncf is again an integer specifying the maximum number of convergence failures accepted; the default value in Sundials is 10. Finally, nlscoef is a floating point scaler corresponding to the coefficient of the nonlinear convergence test; the default value in Sundials is 0.1:

Example of use:

Integrate(Cvodes, 1E-6, 1E-6, 500, 7, 3, 10, 0.1);

The syntax for Euler is:

Integrate(Euler, <time-step>);

where <time-step> is a scalar specifying the constant time increment for each integration step.

Note: if the Integrate() specification is not used, the default integration method is Lsodes with parameters 1e-5, 1e-7 and 1. We recommend using Lsodes, since is it highly accurate and efficient. Euler can be used for special applications (e.g., in system dynamics) where a constant time step and a simple algorithm are needed.


Next: , Previous: , Up: Global specifications   [Contents][Index]

MonteCarlo() specification

Monte Carlo simulations (Hammersley and Handscomb, 1964; Manteufel, 1996) (see Bibliographic References) randomly sample parameter values and run the model for each parameter set so generated. The statistical distribution of the model outputs can be studied for uncertainty analysis, sensitivity analysis etc. Such simulations require the use of two specifications, MonteCarlo() and Distrib(), which must appear in the global section of the file, before the Simulation sections. They are ignored if they appear inside a Simulation section.

The MonteCarlo specification gives general information required for the runs: the output file name, the number of runs to perform, and a starting seed for the random number generator. Its syntax is:

MonteCarlo("<OutputFilename>", <nRuns>, <RandomSeed>);

The character string <OutputFilename>, enclosed in double quotes, should be a valid filename for your operating system. If a null-string "" is given, the default name simmc.out will be used. The number of runs <nRuns> should be an integer, and is only limited by either your storage space for the output file or the largest (long) integer available on your machine. When using the GNU Scientific Library, the seed <RandomSeed> of the pseudo-random number generator can be any positive integer (including zero). When using the native code, it can be any positive real number (seeds between 1.0 and 2147483646.0 are used as is, the others are rescaled silently within those bounds). Here is an example of use:

MonteCarlo("percsimmc.out", 50000, 9386);

The parameters’ sampling distributions are specified by a list of Distrib() specifications, as explained in the following (see Distrib() specification). The format of the output file of Monte Carlo simulations is discussed later (see Analyzing simulation output).

Note on parallelized code: If your model has been preprocessed and compiled by makemcsimp (see Using makemcsim) to generate a parallelization-enabled executable, the number of Monte Carlo simulations requested will be split evenlly between the recruited processors and computed in parallel. The number of processors to use should specified on the calling command-line with the -np option (see Using the compiled program).


Next: , Previous: , Up: Global specifications   [Contents][Index]

MCMC() specification

Markov chain Monte Carlo (MCMC) can be defined as stochastic simulations following a Markov chain in a given parameter space. In MCMC simulations, the random choice of a new parameter value is influenced by the current value. They can be used to obtain a sample of parameter values from complex distribution functions, eventually intractable analytically. Such complex distribution functions are typically encountered during Bayesian data analysis, under the guise of posterior distributions of a model’s parameters. The reader wishing to use the MCMC capabilities of GNU MCSim is referred to the published literature (for example, Bernardo and Smith, 1994; Gelman, 1992; Gelman et al., 1995; Gelman et al., 1996; Gilks et al., 1996; Smith, 1991; Smith and Roberts, 1993) (see Bibliographic References).

MCMC simulation chains (which in GNU MCSim start from a sample from the specified prior) need to reach "equilibrium". Checking that equilibrium is obtained is best achieved, in our opinion, by running multiple independent chains (cf. Gelman and Rubin, 1992, and other relevant statistical literature). GNU MCSim does not deal (yet) with convergence issues.

The Bayesian analysis of data with GNU MCSim requires you to setup:

Setting-up a statistical model requires Level sections and Data() specifications. Assigning priors and likelihoods is achieved through the Distrib() statements (or its equivalents Density() and Likelihood()). Please refer to the corresponding sections of this manual, if you are not familiar with them. The MCMC() statement, gives general directives for MCMC simulations and has the following syntax:

MCMC("<OutputFilename>", "<RestartFilename>", "<DataFilename>",
     <nRuns>, <simTypeFlag>, <printFrequency>, <itersToPrint>,
     <RandomSeed>);

The character strings <OutputFilename>, <RestartFilename>, and <DataFilename>, enclosed in double quotes, should be valid file names for your operating system. If a null-string "" is given instead of the output file name, the default name MCMC.default.out will be used.

If a restart file name is given, the first simulations will be read from that file (which must be a text file). This allows you to continue a simulated Markov chain where you left it, since an MCMC output file can be used as a restart file with no change. Note that the first line of the file (which typically contains column headers) is skipped. Also, the number of lines in the file must be less than or equal to <nRuns>. The first column of the file should be integers, and the following columns (tab- or space-separated) should give the various parameters, in the same order as specified in the list of Distrib() specifications in the input file.

If a data file name is given, the observed (data) values for the simulated outputs will be read from that file (in ASCII format); otherwise, Data() specifications (see Data() specification) should be provided. We recommend that you use Data() specifications rather that the data file, which is much more error prone. The first line of the data file is skipped and can be used for comments. The total number of data points should equal the total number of outputs requested. The data values should be given on the second and following lines, separated by white spaces or tabs. A data value of "-1" will be treated as "missing data" and ignored in likelihood calculations. The convention "-1" can be changed by changing INPUT_MISSING_VALUE in the header file mc.h and recompiling the entire library.

The integer <nRuns> gives the total number of runs to be performed (i.e., the number of posterior samples to draw), including the runs eventually read in the restart file.

Note on parallelized code: If your model has been preprocessed and compiled by makemcsimp (see Using makemcsim) to generate a parallelization-enabled executable, GNU MCSim will run, in parallel, as many simulated Markov chains (of length <nRuns>) as there are available processors. The number of processors to use (hence, of chains to run) should specified on the calling command-line with the -np option (see Using the compiled program). You can assess the chains’ convergence in real time with the Gelman-Rubin’s MCMC convergence diagnostic with the run-time command line option -c (see Using the compiled program)

The next field, <simTypeFlag> should be between 0 and 4 (included):

The integer <printFrequency> should be set to 1 if you want an output at each iteration, to 2 if you want an output at every other iteration etc. The parameter <itersToPrint> is the number of final iterations for which output is required (e.g., 1000 will request output for the last 1000 iterations; to print all iterations just set this parameter to the value of <nRuns>). Note that if no restart file is used, the first iteration is always printed, regardless of the value of <itersToPrint>. Finally, when using the GNU Scientific Library, the seed <RandomSeed> of the pseudo-random number generator can be any positive integer (including zero). When using the native code, it can be any positive real number (seeds between 1.0 and 2147483646.0 are used as is, the others are rescaled silently within those bounds).

In the case of component by component jumps (<simTypeFlag> set to 0), tempered or stochastic optimization (<simTypeFlag> set to 3 or higher), the jump kernel is saved with the same name as the output file, with a .kernel extension. If the simulations are restarted in a continuation mode and if a kernel file with the same name as the restart file (with an added .kernel extension) is present, the jump kernel is restored.

Finally, the format of the output file of MCMC simulations is quite similar to that of straight Monte Carlo simulations and will discussed in a later section (see Analyzing simulation output).


Next: , Previous: , Up: Global specifications   [Contents][Index]

SetPoints() specification

To impose a series of set points (i.e., already tabulated values for the parameters), the global section can include a SetPoints() specification. It allows you to perform additional simulations with previously Monte Carlo sampled parameter values, eventually filtered. You can also generate parameters values in a systematic fashion, over a grid for example, with another program, and use them as input to GNU MCSim. Importance sampling, Latin hypercube sampling, grid sampling, can be accommodated in this way.

This command specifies an output filename, the name of a text file containing the chosen parameter values, the number of simulations to perform and a list of model parameters to read in. Parameters can mix scalar and vector notations. It has the following syntax:

SetPoints("<OutputFilename>", "<SetPointsFilename>", <nRuns>,
          <parameter identifier>, <parameter identifier>, ...);

If a null string is given for the output filename, the set points output will be written to the same default output file used for Monte Carlo analyses, simmc.out.

The SetPointsFilename is required and must refer to an existing file containing the parameter values to use. The first line of the set points file is skipped and can contain column headers, for example. Each of the other lines should contain an integer (e.g., the line number) followed by values of the various parameters in the order indicated in the SetPoints() specification. If extra fields are at the end of each line they are skipped. The first integer field is needed but not used (this allows you to directly use Monte Carlo output files for additional SetPoints simulations).

The variable <nRuns> should be less or equal to the number of lines (minus one) in the set points file. If a zero is given, all lines of the file are read. Finally, a comma-separated list of the parameters or vectors to be read in the SetPointsFilename is given. The format of the output file of set points simulations is discussed below (see Analyzing simulation output).

Following the SetPoints() specification, Distrib() statements can be given for parameters not already in the list (see Distrib() specification). These parameters will be sampled accordingly before to performing each simulation. The shape parameters of the distribution specifications can reference other parameters, including those of the list.

Note on parallelized code: If your model has been preprocessed and compiled by makemcsimp (see Using makemcsim) to generate a parallelization-enabled executable, the number of SetPoints simulations requested will be split evenlly between the recruited processors and computed in parallel. The number of processors to use should specified on the calling command-line with the -np option (see Using the compiled program).


Next: , Previous: , Up: Global specifications   [Contents][Index]

OptimalDesign() specification

The "OptimalDesign" procedure optimizes the number and location of observation times for experimental conditions you specify, in order to minimize the variance of a parameter or an output you designate. It requires a structural model (see Writing and Compiling Structural Models), a statistical model in the form of a likelihood() function (see Setting-up statistical models), and a random set of parameter vectors sampled from a prior distribution (using Monte Carlo or MCMC simulations) (for example and details, see Bois et al., 1999) (see Bibliographic References). The statistical model used should be quite simple and cannot not use Level sections (and hence cannot be hierarchical).

The OptimalDesign command has the following syntax:

OptimalDesign("<OutputFilename>", "<ParameterSampleFilename>",
              <nSamples>, <RandomSeed>, <Style>,
              <parameter identifier>, <parameter identifier>, ...);

The character strings <OutputFilename>, and <ParameterSampleFilename>, enclosed in double quotes, should be valid file names for your operating system. If a null-string "" is given instead of the output file name, the default name simopt.default.out will be used.

A parameter sample file name must be given (that file must be a text file). The first line of the file (which typically contains column headers) is skipped. The number of lines in the file must be less than or equal to <nSamples>. The first column of the file should be integers (typically row numbers), and the following columns (tab- or space-separated) should be values of the various parameters in the order indicated in the list at the end of the OptimalDesign() specification. If extra fields are at the end of each line they are skipped. The first integer field is needed but not used (this allows you to directly use Monte Carlo output files for OptimalDesign simulations).

The integer <nSamples> indicates the number of lines to read from the <ParameterSampleFilename> file. When using the GNU Scientific Library, the seed <RandomSeed> of the pseudo-random number generator can be any positive integer (including zero). When using the native code, it can be any positive real number (seeds between 1.0 and 2147483646.0 are used as is, the others are rescaled silently within those bounds). The directive Style should be either the keyword Forward or the keyword Backward. Forward optimization will start from no new data and will add, sequentially, optimal observation times. Backward optimization starts with the full set of observation times you propose and delete the least informative ones, sequentially. We recommand that you try both options. Finally, a comma-separated list of the parameters to be read in the ParameterSamplFilename should be given.

The input file must then contain two sets of Simulation definitions. You should look at the sample optimal design files provided in mcsim/examples.

The first set specifies all experimental conditions and the set of observation times to optimize, for one or several output variables given in Print statements. The output times you specify for each output variable define an array of observation time values that the optimization algorithm will rank by order of the estimated variance reduction they permit for variables or parameters you will specify in the second set of Simulation definitions. Data will be simulated for each of the required output. There must be one Data statement per output specified (the data values are arbitrary). An error model must be specified for those data, using a Likelihood statement (see Distrib() specification).

The second set of Simulation specifies optimization target parameters or outputs. The algorithm will select time-points (in the first section’s Simulation specifications) that minimize the estimation variance of those parameters or outputs. When a parameter is targeted no inputs are needed. If you optimize for an output variable variance (i.e., for the variance of a model prediction), the experimental conditions can be very different from those of the experiment whose conditions you optimize. The link is afforded solely by the parameters (in the first set you are trying to determine the conditions that will optimally identify the parameter values conditioning the predictions – or trivially, the parameters – of the second set)

The format of the output file of design optimization simulations is quite specific. The first column is an iteration number. At each iteration one observation point is added (Forward mode) or removed (Backward mode). Each step is therefore conditioned by the selection of an observation time-point made by the previous step. The following columns give, for each observation time point you specify, the average variance of the target outputs or parameters achieved if this point is added (Forward mode) or removed (Backward mode). Next the chosen time point at this step is given (the one minimizing average variance), followed by the variance it leads to (in expectation) and the corresponding standard deviation. The last column "Utility" is zero, unless you uncomment the function Compute_utility and modify its code in optdesign.c to compute a utility of your own.


Next: , Previous: , Up: Global specifications   [Contents][Index]

Distrib() specification

The specification of distributions for simple Monte Carlo simulations is quite straighforward. MCMC simulations require the definition of a full statistical model and the use of distributions is somewhat more complex in that case, but the use of Distrib() is basically the same.

In the context of MonteCarlo() or SetPoints() simulations (see MonteCarlo() specification, and SetPoints() specification), one (and only one) Distrib() specification must be included for each model parameter to randomly sample. State, input or output variables cannot be randomly sampled by Distrib() in this context. A simulation specification file can include any number of Distrib() commands at the global level.

Distrib() specifies the name of the parameter to sample, and its sampling distribution. Its syntax is:

Distrib(<parameter identifier>, <distribution-name>,
        [<shape parameters>]);

The <parameter identifier> gives the name of the parameter to sample. The <distribution-name> and the corresponding <shape parameters> indicate the sampling distribution to use (Bernardo and Smith, 1994; Gelman et al., 1995) (see Bibliographic References). They are specified as follow:

The shape parameters of the above distributions, if they are defined, can symbolically reference other model parameters, even if distributions for these have already been defined. For example:

Distrib(A, Normal, 0, 1);
Distrib(B, Normal, A, 2);

In the context of MCMC sampling, GNU MCSim provides extensions of the above Distrib() specification syntax.

First, when Distrib() is used to specify the prior or conditional distribution of a model parameter (in a Bayesian framework), that parameter can depend on another parameter whose distribution has already been specified at an upper Level of the file.

For example:

Level {                      # upper level
  Distrib(A_1, Normal,   0, 1);
  Distrib(B_1, InvGamma, 2, 2);
  Level {                    # sub-level
    Distrib(A_2, Normal_v, A_1, B_1);
    ...
  }                          # end sub-level
}                            # end upper level

In that case, the parameter A_1 is used as the mean of a Normal distribution in the sub-level. The sampled values of the parent parameters A_1 and B_1 will be used as mean and variance for their "child" parameter, A_2, when it will be its turn to be randomly sampled. This forms the basis of the specification of multilevel (hierarchical) models (see Setting-up statistical models).

Note that the keyword Density() can be used instead of Distrib() to make more understandable MCMC input files. Density() and Distrib() are equivalent and have the same syntax. We recommend its use.

Next, in MCMC simulations, you usually assign a probability distribution (i.e., a likelihood) to the data you analyze. Typically, your model’s state and/or output variables will be used to predict some aspect of the observed data distributions (mean, variance, etc.). GNU MCSim gives you the possibility to specify a distribution for your data, using model parameters, input, state, or output model variables, or even other data, to define the distribution shape. This is achieved through the use of the Data() and Prediction() "qualifiers". In that case, the keyword Likelihood() should be used instead of Distrib() (the two keywords are equivalent and have the same syntax, but we recommend that you use Likelihood() to make your MCMC input files more understandable and make it clear that the data are not sampled, but only assigned a likelihood).

Data() can be used at the first position of a Distrib() statement, or as a distribution shape parameter. It uses the following syntax:

Data(<identifier>)

where <identifier> corresponds to a valid input, state or output model variable for which data are available. Model parameters cannot be used (but you can assign a simple parameter value to an output variable in your model definition file and use that output here). The actual data values need to be given later in the simulation input file through Data() specifications (which, in addition to a variable identifier, give a list of numerical data values, see Data() specification) or in a separate datafile (see MCMC() specification).

Working hand in hand with Data(), and using the same syntax, the Prediction() qualifier can be used to designate actual model inputs, states and outputs for any shape parameter of a specified distribution (therefore Prediction() must appear after the distribution name). The actual predicted values, matching exactly the corresponding data, need to be given later in the simulation input file through Print() or PrintStep() specifications [see Print() specification and PrintStep() specification).

Here are some example of use of Data() and Prediction() in the extended syntax of a Likelihood() specification:

Likelihood (Data(y), Normal,   Prediction(y), 0.01);
...
Data (y, 0.1, 2,  5,  3,  9.2);
Print(y, 10,  20, 40, 60, 100);

Likelihood (Data(y), Normal,   Prediction(y), Prediction(sigma));
...
Data (y, 1.01, 1.20, 0.97, 0.80, 1.02);
PrintStep(y,     10, 50, 10);
PrintStep(sigma, 10, 50, 10);

Likelihood (Data(R), Binomial, Prediction(P), Data(N));
...
Data (R, 0,  2,  5, 5,  8, 9, 10, 10);
Data (N, 10, 10, 9, 10, 9, 9, 11, 10);
Print(P, 10, 20, 30,40, 50,60,70, 80);

(all these statements could not appear as such in an input file, they would need to be embedded in Level and Simulation sections.)


Previous: , Up: Global specifications   [Contents][Index]

SimType() specification

This specification is now obsolete and should not be used. It is left for compatibility with old input files. It specifies the type of analysis to perform. Syntax:

SimType(<keyword>);

The following keywords can be used: DefaultSim (the list of specified simulations is simulated), MonteCarlo, MCMC (previously Gibbs, which is now deprecated), SetPoints. If MonteCarlo, MCMC, or SetPoints analyses are requested, additional specifications are needed (see below).


Next: , Previous: , Up: Syntax of simulation files   [Contents][Index]

6.2.4 Specifying basic conditions to simulate

Any simulation file must define at least one Simulation section. Simulation sections include particular specifications, which are presented in the following.


Next: , Up: Specifying basic conditions to simulate   [Contents][Index]

Simulation sections

After global specifications, if any, Simulation sections must be included in the input file. Expectedly, these sections start with the keyword Simulation and are enclosed in curly braces.

A Simulation section can make assignments to any state variable, input variable or parameter defined in the global section of the model description file. Output variables cannot receive assignments in simulation input files.

State variables and parameters can only take constant numerical values (see General input file syntax). For state variables, this sets the initial value only. So, for example, in a Simulation section the parameter Speed, if properly defined, can be set using:

Speed = 83.2;

This overrides any previously assigned values, even if randomly sampled, for the specified parameter.

Inputs can be redefined with input functions (see Input functions revisited) or constant numerical values. Input functions can reference other variables (eventually randomly sampled), as in:

Q_in = PerExp(InMag, 60, 0, RateConst);

The maximum number of Simulation sections allowed in an input file is 200. This can be changed by changing MAX_INSTANCES and MAX_EXPERIMENTS in the header file sim.h and recompiling the program (this requires re-installation).

Within a Simulation section, several additional specifications can be used:

The Data() specification is used only when a statistical model is set up and will be covered in the corresponding section of this manual (Setting-up statistical models).


Next: , Previous: , Up: Specifying basic conditions to simulate   [Contents][Index]

Events() specification for state discontinuities

You can impose state variables discontinuities at a given set of times with the Events specification. Events has a syntax similar to the NDoses input function (see Input functions). It is in fact a special type of input function that resets a state variable, hence the need to assign it to a (dummy) input variable. Its syntax is:

<input variable> = Events(<state variable>, <n>, <list-of-times>,
                          <list-of-operation>, <list-of-scalars>);

The first argument, <state variable>, is the state whose value you want to reset at given times. The integer <n> is the number of reset times you want to specify; <list-of-times> is a comma separated list of those reset times; <list-of-operations> is a comma separated list of operations that will affect the given state variable at the specified times (see next paragraph), and <list-of-scalar> is the list of floating point values used for by the operations specified, at the corresponding times.

The three keywords operations are Add, Multiply and Replace. Add adds the corresponding scalar to the target state variable at the specified time; Multiply multiplies the state variable by the specified scalar; Replace simply replaces the value of the state variable by the given scalar.

The assigned input value takes the value 1 at the specified times and is zero otherwise. If you don’t have a use for such an input, simply define a dummy input variable. For example:

In the model definition file define:

Inputs = {events_v1, events_v2};

and in the simulation specification file you can request, within a Simulation specification:

events_v1 = Events (v1, 2, 1,   9,
                           Add, Add,
                           1,   4);

events_v2 = Events (v2, 2, 1,        5,
                           Multiply, Replace,
                           2,        6);

At time 1, a value of 1 will be added to the state variable v1 and v2 will be multiplied by 2; At time 5 v2 will be reset to 6, and at time 9 the value 4 will be added to v1.

See (and run) the example model and input file provided in the example/events folder.


Next: , Previous: , Up: Specifying basic conditions to simulate   [Contents][Index]

StartTime() specification

The origin of time for a simulation, if it needs to be defined, can be set with the StartTime() specification, whose syntax is:

StartTime(<initial-time>);

It just shifts the time scale. If this specification is not given, a value of zero is used by default. A parameter can be used as initital time value, so that initial time can be sampled in error-in-variable models, for example:

T0 = 20;
StartTime(T0);

The final time is automatically computed to match the largest output time specified in the Print() or PrintStep() statements. Output times cannot be inferior to the initial time.


Next: , Previous: , Up: Specifying basic conditions to simulate   [Contents][Index]

Print() specification

The value of any model variable or parameter can be requested for output with Print() or Prediction() specifications. Their arguments are a comma-separated list of variable names (at least one and up to MAX_PRINT_VARS, which is set to 10 by default), and a comma-separated list of increasing times at which to output their values:

Print(<identifier1>, <identifier2>, ..., <time1>, <time2>, ...);
Prediction(<identifier3>, <identifier4>, ..., <time1>, <time2>, ...);

where <identifier1>, <identifier2> etc. correspond to valid input, state or output model variables, or parameter.

The same output times are used for all the variables specified. The size of the time list is only limited by the available memory at run time. The limit of 10 variables names can be increased by changing MAX_PRINT_VARS in the header file sim.h and re-installing the whole software. The number of Print() statements you can used in a given Simulation section is only limited by the available memory at run time. The same variable or parameter can appear in more than one Print() specification in a given Simulation section.


Previous: , Up: Specifying basic conditions to simulate   [Contents][Index]

PrintStep() specification

The value of any model variable or parameter can be also output with PrintStep() specifications. They allow dense printing, suitable for smooth plots, for example. Their arguments are: a comma-separated list of variable names (at least one and up to MAX_PRINT_VARS, which is set to 10 by default), the first output time, the last one, and a time increment:

PrintStep(<identifier1>, <identifier2>, ..., <start-time>, <end-time>,
          <time-step>);

The final time has to be superior to the initial time and the time step has to be less than the time span between end and start. If the time step is not an exact divider of the time span the last printing step is shorter and the last output time is still the end-time specified. The number of outputs produced is only limited by the memory available at run time. You can use several PrintStep() specification, and the same variable or parameter can appear in more than one PrintStep(), in a given Simulation section.


Previous: , Up: Syntax of simulation files   [Contents][Index]

6.2.5 Setting-up statistical models

With GNU MCSim, you must define a statistical model to use the MCMC() specification. MCMC simulations will give you a sample from the joint posterior distribution of the parameters that you designate as randomly sampled through Distrib() specifications. You do not need to specify explicitly that joint posterior distribution (in fact, in most case, this is impossible). The posterior distribution is implicitly defined by a statistical model, that is simply a set of conditional relationship between the parameters and some data.

GNU MCSim handles multilevel (hierarchical) random effects and mixed effects statistical models in a Bayesian framework. These models need to be defined in the simulation specification file, rather than in the structural model definition file. Yet, due to compilation constraints, if you need special parameters for your statistical model (e.g., variances) you have to declare them in the structural model file, even if they are not used by the structural model itself.

So, how do we go about specifying a statistical model with GNU MCSim? Take for example the following simple linear regression model:

y_i = N(Mu_i, Sigma^2), Mu_i = Alpha + Beta * (x_i - x_bar).

where the observed (x,y) pairs are (1,1), (2,3), (3,3), (4,3) and (5,5). Assume that the parameters Alpha and Beta are given N(0,10000) priors, and that 1/Sigma^2 is given a Gamma(1e-2,1e-2) prior. x_bar is the average of the above values for x. We want the posterior distributions of Alpha, Beta, and Sigma^2.

The first thing to do is to define a structural (or link) model to compute y as a function of x. Here is such a model (quite similar to the one distributed with GNU MCSim source code (see linear.model):

# ---------------------------------------------
# Model definition file for a linear model
# ---------------------------------------------
Outputs = {y};

# Structural model parameters
Alpha = 0;
Beta = 0;
x_bar = 0;

# Statistical parameter
Sigma2 = 1;

CalcOutputs { y = Alpha + Beta * (t - x_bar); }
# ---------------------------------------------

The parameters’ default values are arbitrary, and could be anything reasonable. They will be changed or sampled through the input file. Note that Sigma2 is not used in the model equations, but still needs to be defined here in order to be part of the statistical model. On the other hand, Mu is not defined, since we do not really need it. Finally x is replaced by the time, t, for convenience. An alternative would be to define an input ‘x’ and use it instead of t.

We now need to write an input file specifying the distribution of y (i.e., the likelihood), and the prior distributions of the various parameters. Technically, GNU MCSim uses Metropolis sampling and you do not need to worry about issues of conjugacy or log-concavity of your prior or posterior distributions. Here is what a simulation file with a statistical model looks like:

# ---------------------------------------------------------------
# Simulation input file for a linear regression
# ---------------------------------------------------------------
MCMC ("linear.MCMC.out", "", "", 50000, 0, 5, 40000, 63453.1961);
Level {
  Distrib(Alpha,  Normal_v, 0, 10000);
  Distrib(Beta,   Normal_v, 0, 10000);
  Distrib(Sigma2, InvGamma, 0.01, 0.01);
  Likelihood(Data(y), Normal_v, Prediction(y), Sigma2);
  Simulation {
    x_bar = 3.0;
    PrintStep (y, 1, 5, 1);
    Data (y, 1, 3, 3, 3, 5);
  }
} # end Level
End.
# ---------------------------------------------------------------

The file begins with MCMC() (see MCMC() specification). The keyword Level comes next. Level is used to specify hierarchical dependences between model parameters. There should be at least one Level in every MCMC input file, even for a non-hierarchical model like the one above. See below for further discussion of the Level keyword. You can also look at the MCMC input files provided as examples with GNU MCSim source code. The Distrib() statements define the parameter priors. Normal_v specifications are used since we use variances instead of standard deviations. The inverse-Gamma distribution is used for the variance component, since the precision is supposed to be Gamma-distributed. The likelihood is the distribution of the data, given the model: it is specified by a Likelihood() specification, valid for every y data point. Again, note that the Mu variable is not used. Instead, the Prediction(y) specification designates the linear model output. The distributions and likelihoods specified are in effect for every sub-level or every Simulation section included in the current Level.

The "simulations" to perform, and the corresponding data values, are specified by a Simulation section. Only one Simulation section is needed here, but several could be specified. In this section, the value of x_bar is provided. The different values of x (time in our formulation of the model) can be specified via PrintStep() (see PrintStep() specification), since they are equally spaced. More generally, Print() can also be used (see Print() specification). The data values are given in a Data() statement (see below).

The following paragraphs deal with Level sections and Data() specifications.


Next: , Up: Setting-up statistical models   [Contents][Index]

Level sections

Markov chain Monte Carlo simulations require the definition of a statistical model structured with "levels". Think for example of the definition of a prior distribution as a top level in a hierarchy, with the data likelihood being at the lowest level. The hierarchy levels are defined in GNU MCSim with the help of Level sections. At least one Level section must be defined in the simulation input file (you cannot use Level in a structural model definition file). A Level section starts with the corresponding keyword and is enclosed in curly braces (’{}’). It can include any number of sub-levels or Simulations sections. Simulations (where the data are specified) form the lowest level of the hierarchy (see Simulation sections). In terms of structure, Simulation sections behave like Level sections (in particular with regard to "cloning" of random variables, see below) except that they cannot include further levels. There must be one and only one top Level and at most 10 nested sub-levels in the hierarchy. No parameter assignement or distribution specification should occur outside a Level, otherwise it will be ignored (which is probably not what you want). This limit of 10 can be increased (up to 255) by changing MAX_LEVELS in the header file sim.h and re-installing GNU MCSim.

A Level can define the sampling distribution of any model parameter properly defined in the global section of the structural model description file. These distribution specifications may depend on parameters whose distribution are defined in levels above. They apply to all sub-levels of the Level where they take place. For example:


MCMC("samp.out", "", "", 1, 1, 1, 1, 1); # we are in an MCMC context
Level { # this is the top level
  Distrib(A_top, Uniform, 0, 1);
  Likelihood(Data(y), Normal, Prediction(y), 1);
  Level { # sub-level 1
    Distrib(A, Normal, A_top, 1);
    Simulation { ... } # simulation 1
    Simulation { ... } # simulation 2
  } # End sub-level 1
} # End top, end file
End.

A Level can also make simple assignments to any model parameter (see General input file syntax). So, for example, in an simulation, the parameter A could be modified with:

A = 2.0;

This overrides any previously assigned values for the specified parameter, even if randomly sampled, and applies to the sub-levels of the Level where it take place.

An important concept to grasp here is that of parameter "cloning". Cloning automatically creates, using templates, as many new parameters as you need in your multilevel model. One of the characteristic feature of multilevel models is the same parameters appear at several levels. For example, in a random effect model, a parameter (e.g., size) will be assumed to be randomly distributed in a population of individuals. If you have 100 individuals in your database, your model will have to deal with 100 individual size parameters and an average size. To spare you the tedium of defining the same distribution for many parameters, GNU MCSim creates an appropriate number of parameters for your model on the basis of its level structure. Assume that you have specified a distribution for a parameter A at a given level (that we label L1 for clarity). GNU MCSim will automatically create new parameters ("clones") with the same distribution as A to match the number of immediate sub-levels in L1. For example, if there are three sub-levels included in L1, GNU MCSim creates two clones to form a total of three instances of A (the original and its two clones). This convention saves a lot writing and effort in the long run.

In the example of code given above, the parameter A_top, defined at the top level, will be simply moved to sub-level 1 (cloning is not necessary since there is only on sub-level directly included in the top level). Within sub-level 1, the normally-distributed A will be cloned once in order to create two normal variates with the same distribution. Each one of those two will be moved to a lower Simulation, where they will be conditioned by the data of that simulation only. A total of three variables, A_top, A.1 and A.2 will be sampled and printed in the output file (coded so that the position in the hierarchy is apparent): the "parent" A_top(1), a priori uniformly distributed, and two "dependents" A(1.1) and A(1.2), a priori normally distributed around A_top.

Note that you can check on the console screen the detail of the actual multilevel structure of your statistical model at run-time by using option -D=print-hierarchy (see Using the compiled program).


Previous: , Up: Setting-up statistical models   [Contents][Index]

Data() specification

Experimental observations of model variables, inputs, outputs, or parameters, can be specified with the Data() command. Markov chain Monte Carlo sampling requires that you specify Data() statements (see MCMC() specification; see Setting-up statistical models). The data are then used internally to evaluate the likelihood function for the model. The arguments are the name of the variable for which observations exist, and a comma-separated list of data values:

Data(<variable identifier>, <value1>, <value2>, ...);

This specification can only be used with a matching Print() or PrintStep() for the same variable (see Print() specification; see PrintStep() specification). You must make sure that there are as many data values in the Data() specification as output time requested in the corresponding Print() or PrintStep(). A data value of "-1" is treated as "missing data" and ignored in likelihood calculations. The convention "-1" can be changed by changing INPUT_MISSING_VALUE in the header file mc.h and recompiling.


Next: , Previous: , Up: Running Simulations   [Contents][Index]

6.3 Analyzing simulation output

The output from Monte Carlo or SetPoints simulations is a tab-delimited text file with one row for each run (i.e., parameter set) and one column for each parameter and output in the order specified. Thus each line of the output file is in the following order:

<# of run> <parameters> <outputs for Exp 1> <outputs for Exp2> ...

The parameters are printed in the order they were sampled or set.

The first line gives the column headers. A variable called name requested for output in an simulation i at a time j is labeled name_i.j.

The output of Markov chain Monte Carlo simulations is also a text file with one row for each run. It displays a column of iteration labels, and one column for each parameter sampled. The last three columns contain respectively, the sum of the logarithms of each parameter’s density given its parents’ values (‘LnPrior’), the logarithm of the data likelihood (‘LnData’), and the sum of the previous two values (‘LnPosterior’). The first line gives the column headers. On this line, parameters names are tagged with a code identifying their position in the hierarchy defined by the Level sections. For example, the second instance of a parameter called name placed at the fist level of the hierarchy is labeled name(2); the first instance of the same parameter placed at the second instance of the second level of the hierarchy is labeled name(2.1), etc.

If tempered Markov chain Monte Carlo simulations have been requested, the overall output format is the same as above, with the addition of a column of perk index (the lowest perk having index zero), and columns of log-pseudoprior values (one column per perk, starting with the log-pseudoprior of the lowest perk). Those extra colums are labelled ‘IndexT’, ‘LnPseudoPrior(1)’, ‘LnPseudoPrior(2)’, etc. and come just after the parameters. The samples at the highest perk (typically, perk 1) can be found by selecting the highest value of ‘IndexT’.

In addition, in the case of tempered MCMC, an history of the perks values computed is saved with the same name as the output file, with a .perks extension. It lists perk values, counts of samples and log-pseudoprior at each perk, attempted jumps and successful jumps between perks. This can help check the perk schedule optimisation (in particular whether perk zero has been reached) and the behavior of the chain over perks values. If the perks are correctly spaced, there should be about equal number of samples at each perk, and jumps between perks should be frequent.

Those tab-delimited files can easily be imported into your favorite spreadsheet, graphic or statistical package for further analysis.


Previous: , Up: Syntax of simulation files   [Contents][Index]

6.4 Error handling

If integration fails for a imulation in DefaultSim simulations no output is generated for that simulation, and the user is warned by an error message on the screen. In MonteCarlo or SetPoints simulations, the corresponding simulation line is not printed, but the iteration number is incremented. Finally, in MCMC simulations, the parameter for which the data likelihood was computed is simply not updated (which implicitly forbids the uncomputable region of the parameter space). In all cases an error message is given on the screen, or wherever the screen output has been redirected.


Next: , Previous: , Up: Top   [Contents][Index]

7 Common Pitfalls

The following mistakes are particularly easy to make, and sometimes hard to notice, or understand at first.


Next: , Previous: , Up: Top   [Contents][Index]

8 XMCSim

XMCSim is a menu-driven interface which automatizes the compilation and running tasks of GNU MCSim. It also offers a convenient interface to 2-D and 3-D plotting of the simulation results. Note that you need XWindows, Tcl/Tk and wish installed to run XMCSim. xemacs is also recommended.

Just type xmcsim at the command promt. A windows appear, with a menu bar. Menu items are:

At some point GNU MCSim may do symbolic computations, wash dishes, clothes and cars, and write poems, but for now, that’s all, folks!


Next: , Previous: , Up: Top   [Contents][Index]

Bibliographic References

Amzal B., Bois F., Parent E. and Robert C.P. (2006). Bayesian optimal design via interacting MCMC, Journal of the American Statistical Association, 101:773-785.

Barry T.M. (1996). Recommendations on the testing and use of pseudo-random number generators used in Monte Carlo analysis for risk assessment. Risk Analysis 16:93-105.

Bernardo J.M. and Smith A.F.M. (1994). Bayesian Theory. Wiley, New York.

Bois F.Y., Gelman A., Jiang J., Maszle D., Zeise L. and Alexeef G. (1996). Population toxicokinetics of tetrachloroethylene. Archives of Toxicology 70:347-355.

Bois F.Y., Smith T.J., Gelman, A., Chang H.Y., Smith A.E. (1999). Optimal design for a study of butadiene toxicokinetics in humans. Toxicological Sciences 49:213-224.

Bois F.Y., Zeise L. and Tozer T.N. (1990). Precision and sensitivity analysis of pharmacokinetic models for cancer risk assessment: tetrachloroethylene in mice, rats and humans. Toxicology and Applied Pharmacology 102:300-315.

Calderhead B. and Girolami M. (2009). Estimating Bayes factors via thermodynamic integration and population MCMC. Computational Statistics and Data Analysis 53:4028-4045.

Gear C.W. (1971a). Algorithm 407 - DIFSUB for solution of ordinary differential equations [D2]. Communications of the ACM 14:185-190.

Gear C.W. (1971b). The automatic integration of ordinary differential equations. Communications of the ACM 14:176-179.

Gelman A. (1992). Iterative and non-iterative simulation algorithms. Computing Science and Statistics 24:433-438.

Gelman A., Bois F.Y. and Jiang J. (1996). Physiological pharmacokinetic analysis using population modeling and informative prior distributions. Journal of the American Statistical Association 91:1400-1412.

Gelman A., Carlin J.B., Stern H.S. and Rubin D.B. (1995). Bayesian Data Analysis. Chapman & Hall, London.

Gelman A. and Rubin D.B. (1992). Inference from iterative simulation using multiple sequences (with discussion). Statistical Science 7:457-511.

Geyer C.J. and Thompson E.A. (1995). Annealing Markov chain Monte Carlo with applications to ancestral inference. Journal of the American Statistical Association90: 909-920.

Gilks W.R., Richardson S. and Spiegelhalter D.J. (1996). Markov Chain Monte Carlo In Practice. Chapman & Hall, London.

Hammersley J.M. and Handscomb D.C. (1964). Monte Carlo Methods. Chapman and Hall, London.

Manteufel R.D. (1996). Variance-based importance analysis applied to a complex probabilistic performance assessment. Risk Analysis 16:587-598.

Park S.K. and Miller K.W. (1988). Random number generators: good ones are hard to find. Communications of the ACM 31:1192-1201.

Press W.H., Flannery B.P., Teukolsky S.A. and Vetterling W.T. (1989). Numerical Recipes (2nd ed.). Cambridge University Press, Cambridge.

Robert C.P. (1995). Simulation of truncated normal variables. Statistics and Computing. 5(2):121-125. doi:10.1007/BF00143942.

Savic R.M., Jonker D.M., Kerbusch T., Karlsson M.O. (2007). Implementation of a transit compartment model for describing drug absorption in pharmacokinetic studies. Journal of Pharmacokinetics and Pharmacodynamics 34:711–726. doi:10.1007/s10928-007-9066-0.

Smith A.F.M. (1991). Bayesian computational methods. Philosophical Transactions of the Royal Society of London, Series A 337:369-386.

Smith A.F.M. and Roberts G.O. (1993). Bayesian computation via the Gibbs sampler and related Markov chain Monte Carlo methods. Journal of the Royal Statistical Society Series B 55:3-23.

Vattulainen I., Ala-Nissila T. and Kankaala K. (1994). Physical tests for random numbers in simulations. Physical Review Letters 73:2513-2516.


Next: , Previous: , Up: Top   [Contents][Index]

Appendix A Keywords List

You should use the following reserved keywords as prescribed when building your models and input files:


Next: , Previous: , Up: Top   [Contents][Index]

Appendix B Examples

You will find here some examples of model description files and simulation input files.


Next: , Up: Examples   [Contents][Index]

B.1 linear.model

# Linear Model with a random component
# y = A + B * time + N(0,SD_true)
# Setting SD_true to zero gives the deterministic version
#---------------------------------------------------------

# Outputs
Outputs = {y};

# Model Parameters
A = 0;
B = 1;
SD_true = 0;
SD_esti = 0;

CalcOutputs { y = A + B * t + NormalRandom(0,SD_true); }

Next: , Previous: , Up: Examples   [Contents][Index]

B.2 1cpt.model: A example model description file

# One Compartment Model
# First order input and output
#---------------------------------------------------------

# Inputs
Inputs = {Dose};

# Outputs
Outputs = {C_central, AUC, ln_C_central, ln_AUC,
           SD_C_computed, SD_A_computed};

# Model Parameters
ka = 1;
ke = 0.5;
F  = 1;
V  = 2;

# Statistical Parameters
SDb_ka = 0;
SDw_ka = 0;
SDb_ke = 0;
SDw_ke = 0;
SDb_V  = 0;
min_F  = 0;
max_F  = 0;
SD_C_central = 0;
SD_AUC       = 0;
CV_C_cen     = 0;
CV_AUC       = 0;
CV_C_cen_true = 0;
CV_AUC_true   = 0;


# Calculate Outputs
CalcOutputs {

  # algebraic equation for C_central
  C_central = (ka != ke ?
               (exp(-ke * t) - exp(-ka * t)) *
               F * ka * Dose / (V * (ka - ke))):
               exp(-ka * t) * ka * t * F * Dose / V);

  # algebraic equation for AUC
  AUC = (ka != ke ?
         ((1 - exp(-ke * t)) / ke -
          (1 - exp(-ka * t)) / ka) * F * ka * Dose / (V * (ka - ke))) :
         F * Dose * (1 - (1 + ka * t) * exp(-ka * t)) / (V * ke));

  C_central = C_central + NormalRandom(0, C_central * CV_C_cen_true);
  AUC       = AUC + NormalRandom(0, AUC * CV_AUC_true);

  ln_C_central = (C_central > 0 ? log (C_central) : -100);
  ln_AUC = (AUC > 0 ? log (AUC) : -100);

  SD_C_computed = (C_central > 0 ? C_central * CV_C_cen : 1e-10);
  SD_A_computed = (AUC > 0 ? AUC * CV_AUC : 1e-10);

} # End of output calculations

End.

Next: , Previous: , Up: Examples   [Contents][Index]

B.3 perc.model: A example model description file

#---------------------------------------------------------
# perc.model
# A four compartment model of Tetrachloroethylene (PERC)
# and total metabolites.
#---------------------------------------------------------
# States are quantities of PERC and metabolite formed, they can be
# output

States = {Q_fat,        # Quantity of PERC in the fat
          Q_wp,         #   ...   in the well-perfused compartment
          Q_pp,         #   ...   in the poorly-perfused compartment
          Q_liv,        #   ...   in the liver
          Q_exh,        #   ...   exhaled
          Qmet};        # Quantity of metabolite formed


# Extra outputs are concentrations at various points

Outputs = {C_liv,               # mg/l in the liver
           C_alv,               # ... in the alveolar air
           C_exh,               # ... in the exhaled air
           C_ven,               # ... in the venous blood
           Pct_metabolized,     # % of the dose metabolized
           C_exh_ug};           # ug/l in the exhaled air

Inputs = {C_inh}                # Concentration inhaled

# Constants
# Conversions from/to ppm: 72 ppm = .488 mg/l

PPM_per_mg_per_l = 72.0 / 0.488;
mg_per_l_per_PPM = 1/PPM_per_mg_per_l;

#---------------------------------------------------------
# Nominal values for parameters
# Units:
# Volumes: liter
# Vmax:    mg / minute
# Weights: kg
# Km:      mg / minute
# Time:    minute
# Flows:   liter / minute
#---------------------------------------------------------

InhMag = 0.0;
Period = 0.0;
Exposure = 0.0;

C_inh = PerDose (InhMag, Period, 0.0, Exposure);

LeanBodyWt = 55;    # lean body weight

# Percent mass of tissues with ranges shown

Pct_M_fat  = .16;   # % total body mass
Pct_LM_liv = .03;   # liver, % of lean mass
Pct_LM_wp  = .17;   # well perfused tissue, % of lean mass
Pct_LM_pp  = .70;   # poorly perfused tissue, recomputed in scale

# Percent blood flows to tissues

Pct_Flow_fat = .09;
Pct_Flow_liv = .34;
Pct_Flow_wp  = .50; # will be recomputed in scale
Pct_Flow_pp  = .07;

# Tissue/blood partition coeficients

PC_fat = 144;
PC_liv = 4.6;
PC_wp  = 8.7;
PC_pp  = 1.4;
PC_art = 12.0;

Flow_pul   = 8.0;    # Pulmonary ventilation rate (minute volume)
Vent_Perf = 1.14;    # ventilation over perfusion ratio

sc_Vmax = .0026;     # scaling coeficient of body weight for Vmax

Km = 1.0;

# The following parameters are calculated from the above values in
# the Scale section before the start of each simulation.
# They are left uninitialized here.

BodyWt = 0;

V_fat = 0;           # Actual volume of tissues
V_liv = 0;
V_wp  = 0;
V_pp  = 0;

Flow_fat = 0;        # Actual blood flows through tissues
Flow_liv = 0;
Flow_wp  = 0;
Flow_pp  = 0;

Flow_tot = 0;        # Total blood flow
Flow_alv = 0;        # Alveolar ventilation rate

Vmax = 0;            # kg/minute


#---------------------------------------------------------
# Dynamics
# Define the dynamics of the simulation. This section is
# calculated with each integration step. It includes
# specification of differential equations.
#---------------------------------------------------------

Dynamics {

# Venous blood concentrations at the organ exit

Cout_fat = Q_fat / (V_fat * PC_fat);
Cout_wp  = Q_wp  / (V_wp  * PC_wp);
Cout_pp  = Q_pp  / (V_pp  * PC_pp);
Cout_liv = Q_liv / (V_liv * PC_liv);

# Sum of Flow * Concentration for all compartments

dQ_ven = Flow_fat * Cout_fat + Flow_wp * Cout_wp
         + Flow_pp * Cout_pp + Flow_liv * Cout_liv;

# Venous blood concentration

C_ven =  dQ_ven / Flow_tot;

# Arterial blood concentration
# Convert input given in ppm to mg/l to match other units

C_art = (Flow_alv * C_inh / PPM_per_mg_per_l +  dQ_ven) /
        (Flow_tot + Flow_alv / PC_art);

# Alveolar air concentration

C_alv = C_art / PC_art;

# Exhaled air concentration

C_exh = 0.7 * C_alv + 0.3 * C_inh / PPM_per_mg_per_l;

# Differentials

dt (Q_exh) = Flow_alv * C_alv;
dt (Q_fat) = Flow_fat * (C_art - Cout_fat);
dt (Q_wp)  = Flow_wp  * (C_art - Cout_wp);
dt (Q_pp)  = Flow_pp  * (C_art - Cout_pp);

# Quantity metabolized in liver

dQmet_liv = Vmax * Q_liv / (Km + Q_liv);
dt (Q_liv) = Flow_liv * (C_art - Cout_liv) - dQmet_liv;

# Metabolite formation

dt (Qmet)  = dQmet_liv;

} # End of Dynamics


#---------------------------------------------------------
# Scale
# Scale certain model parameters and resolve dependencies
# between parameters. Generally the scaling involves a
# change of units, or conversion from percentage to actual
# units.
#---------------------------------------------------------

Scale {

# Volumes scaled to actual volumes

BodyWt = LeanBodyWt/(1 - Pct_M_fat);

V_fat = Pct_M_fat  * BodyWt/0.92;        # density of fat = 0.92 g/ml
V_liv = Pct_LM_liv * LeanBodyWt;
V_wp  = Pct_LM_wp  * LeanBodyWt;
V_pp  = 0.9 * LeanBodyWt - V_liv - V_wp; # 10% bones

# Calculate Flow_alv from total pulmonary flow

Flow_alv = Flow_pul * 0.7;

# Calculate total blood flow from the alveolar ventilation rate and
# the V/P ratio.

Flow_tot = Flow_alv / Vent_Perf;

# Calculate actual blood flows from total flow and percent flows

Flow_fat = Pct_Flow_fat * Flow_tot;
Flow_liv = Pct_Flow_liv * Flow_tot;
Flow_pp  = Pct_Flow_pp  * Flow_tot;
Flow_wp  = Flow_tot - Flow_fat - Flow_liv - Flow_pp;

# Vmax (mass/time) for Michaelis-Menten metabolism is scaled
# by multiplication of bdw^0.7

Vmax = sc_Vmax * exp (0.7 * log (LeanBodyWt));

} # End of model scaling


#---------------------------------------------------------
# CalcOutputs
# The following outputs are only calculated just before values
# are saved.  They are not calculated with each integration step.
#---------------------------------------------------------

CalcOutputs {

# Fraction of TCE metabolized per day

Pct_metabolized = (InhMag ?
                   Qmet / (1440 * Flow_alv * InhMag * mg_per_l_per_PPM):
                   0);

C_exh_ug  = C_exh * 1000; # milli to micrograms

} # End of output calculation

End.

Previous: , Up: Examples   [Contents][Index]

B.4 perc.lsodes.in

#---------------------------------------------------------
# perc.lsodes.in
#
#---------------------------------------------------------

Integrate (Lsodes, 1e-4, 1e-6, 1);


#---------------------------------------------------------
# The following is a simulation of one of Dr. Monster's
# exposure experiments described in "Kinetics of Tetracholoroethylene
# in Volunteers; Influence of Exposure Concentration and Work Load,"
# A.C. Monster, G. Boersma, and H. Steenweg,
# Int. Arch. Occup. Environ. Health, v42, 1989, pp303-309
#
# The paper documents measurements of levels of TCE in blood and
# exhaled air for a group of 6 subjects exposed to
# different concentrations of PERC in air.
#
# Inhalation is specified as a dose of magnitude InhMag for the
# given Exposure time.
#
# Inhalation is given in ppm
#---------------------------------------------------------

Simulation {

InhMag = 72;            # ppm
Period = 1e10;          # Only one dose
Exposure = 240;         # 4 hour exposure

# measurements before end of exposure
# and at [5' 30'] 2hr 18 42 67 91 139 163

Print (C_exh_ug, 239.9 245 270 360 1320 2760 4260 5700 8580 10020 );
Print (C_ven, 239.9 360 1320 2760 4260 5700 8580 10020 );

}

END.

Previous: , Up: Top   [Contents][Index]

Concept Index

Jump to:   '  
A   B   C   D   E   F   G   H   I   K   L   M   N   O   P   Q   R   S   T   U   V   W   X  
Index Entry  Section

'
’!=’ operator: General syntax
’#’ sign: General syntax
’-’ (hyphen) sign: General syntax
’:’ sign: General syntax
’;’ sign: General syntax
’<’ operator: General syntax
’<=’ operator: General syntax
’<>’ operator: General syntax
’=’ sign: General syntax
’==’ operator: General syntax
’>’ operator: General syntax
’>=’ operator: General syntax
’?’ sign: General syntax
’[]’ (square brackets) notation: General syntax
’_’ (underscore) in templates: Reading SBML models
’_’ (underscore) vector notation: General syntax

A
Algebraic models: Model types
Analyzing simulation output: Analyzing simulation output
Arrays: General syntax
Assignment: General syntax

B
Beta distribution: Distrib() specification
BetaRandom() function: Special functions
Bibliographic references: Bibliographic References
Binomial distribution: Distrib() specification
BinomialBetaRandom() function: Special functions
BinomialRandom() function: Special functions
Blank lines: General syntax

C
CalcOutputs, output section: Output calculations
Cauchy distribution: Distrib() specification
Cauchy distribution: Distrib() specification
CauchyRandom() function: Special functions
CDFNormal() function: Special functions
Chi-square distribution: Distrib() specification
Chi2 distribution: Distrib() specification
Chi2Random() function: Special functions
Colon conditional assignment: General syntax
command-line options: Using the compiled program
Comments: General syntax
Common pitfalls: Common Pitfalls
Comparison operators: General syntax
Compartment keyword: Reading SBML models
Complementary error function: Special functions
Conditional assignment: General syntax
Cumulative density function, Normal: Special functions
Cvodes integrator: Integrate() specification

D
Data() qualifier, for use in Distrib(): Distrib() specification
Data() specification: Data() specification
Default: Overview
Defining models: Writing and Compiling Structural Models
Delay differential equations: Delay differentials
Density function, Normal: Special functions
Density() specification: Distrib() specification
Derivative specification: Dynamics section
Differential models: Model types
Discrete-time models: Model types
Distrib() specification: Distrib() specification
Distribution, Beta: Distrib() specification
Distribution, Binomial: Distrib() specification
Distribution, Cauchy: Distrib() specification
Distribution, Cauchy: Distrib() specification
Distribution, Chi-square: Distrib() specification
Distribution, Chi2: Distrib() specification
Distribution, Exponential: Distrib() specification
Distribution, Gamma: Distrib() specification
Distribution, HalfCauchy: Distrib() specification
Distribution, HalfNormal: Distrib() specification
Distribution, inverse-gamma: Distrib() specification
Distribution, InvGamma: Distrib() specification
Distribution, LogNormal: Distrib() specification
Distribution, LogNormal_v: Distrib() specification
Distribution, Loguniform: Distrib() specification
Distribution, NegativeBinomial: Distrib() specification
Distribution, Normal: Distrib() specification
Distribution, Normal_cv: Distrib() specification
Distribution, Normal_v: Distrib() specification
Distribution, Piecewise: Distrib() specification
Distribution, Poisson: Distrib() specification
Distribution, StudentT: Distrib() specification
Distribution, triangular: Distrib() specification
Distribution, truncated inverse-gamma: Distrib() specification
Distribution, truncated lognormal: Distrib() specification
Distribution, truncated normal: Distrib() specification
Distribution, TruncInvGamma: Distrib() specification
Distribution, TruncLogNormal: Distrib() specification
Distribution, TrunclogNormal_v: Distrib() specification
Distribution, TruncNormal: Distrib() specification
Distribution, Truncnormal_cv: Distrib() specification
Distribution, Truncnormal_v: Distrib() specification
Distribution, Uniform: Distrib() specification
Distribution, UserSpecifiedLL: Distrib() specification
Documentation license: Licenses
Dt() operator: Dynamics section
Dynamics section: Dynamics section

E
End keyword: General syntax
erfc() function: Special functions
Error function, complementary: Special functions
Error handling: Error handling
Euler integrator: Integrate() specification
Events specification: Events() specification
Examples: Writing and Compiling Structural Models
Examples: Examples
Experiment sections: Simulation sections
Experimental design optimization: Overview
Exponential distribution: Distrib() specification
ExpRandom() function: Special functions

F
Function, BetaRandom(): Special functions
Function, BinomialBetaRandom(): Special functions
Function, BinomialRandom(): Special functions
Function, CauchyRandom(): Special functions
Function, CDFNormal(): Special functions
Function, Chi2Random(): Special functions
Function, erfc(): Special functions
Function, ExpRandom(): Special functions
Function, GammaRandom(): Special functions
Function, GetSeed(): Special functions
Function, GGammaRandom(): Special functions
Function, Inline, in line: In line functions
Function, input: General syntax
Function, InvGGammaRandom(): Special functions
Function, lnDFNormal(): Special functions
Function, lnGamma(): Special functions
Function, LogNormalRandom(): Special functions
Function, LogUniformRandom(): Special functions
Function, NDoses(): Input functions
Function, NDoses(): Input functions revisited
Function, NegativeBinomialRandom(): Special functions
Function, NormalRandom(): Special functions
Function, PerDose(): Input functions
Function, PerDose(): Input functions revisited
Function, PerExp(): Input functions
Function, PerExp(): Input functions revisited
Function, PerTransit(): Input functions
Function, PerTransit(): Input functions revisited
Function, PiecewiseRandom(): Special functions
Function, PoissonRandom(): Special functions
Function, SetSeed(): Special functions
Function, special: General syntax
Function, Spikes(): Input functions
Function, Spikes(): Input functions revisited
Function, StudentTRandom(): Special functions
Function, TruncInvGGammaRandom(): Special functions
Function, TruncLogNormalRandom(): Special functions
Function, TruncNormalRandom(): Special functions
Function, UniformRandom(): Special functions
Functions, input: Input functions
Functions, input: Input functions revisited
Functions, special: Special functions

G
Gamma distribution: Distrib() specification
Gamma function: Special functions
GammaRandom() function: Special functions
General input file syntax: General input file syntax
GetSeed() function: Special functions
GGammaRandom() function: Special functions
Global specifications: Global specifications

H
HalfCauchy distribution: Distrib() specification
HalfNormal distribution: Distrib() specification

I
Initialize, initialization section,: Model initialization
Inline, in line functions: In line functions
Input functions: General syntax
Input functions: Input functions
Input functions: Input functions revisited
Input variables: Declarations of global variables
Installation: Installation
Integrate() specification: Integrate() specification
Integration routine, Cvodes: Integrate() specification
Integration routine, Euler: Integrate() specification
Integration routine, Lsodes: Integrate() specification
Integration variable: Dynamics section
Inverse-gamma distribution: Distrib() specification
InvGamma distribution: Distrib() specification
InvGGammaRandom() function: Special functions
InvTemperature() specification: MCMC() specification

K
Keyword, Compartment: Reading SBML models
Keywords list: Keywords List

L
Level sections: Level sections
Licenses: Licenses
Likelihood() specification: Distrib() specification
lnDFNormal() function: Special functions
lnGamma() function: Special functions
Logical tests: General syntax
LogNormal distribution: Distrib() specification
LogNormalRandom() function: Special functions
LogNormal_v distribution: Distrib() specification
LogUniform distribution: Distrib() specification
LogUniformRandom() function: Special functions
Lsodes integrator: Integrate() specification

M
Major changes in the next version: Overview
Major changes in version 5.4.0: Overview
Major changes in version 5.5.0: Overview
Major changes in version 5.6.0: Overview
Major changes in version 6.0.0: Overview
Major changes in version 6.1.0: Overview
Major changes in version 6.2.0: Overview
makemcsim script: Using makemcsim
makemcsimd script: Using makemcsim
makemcsimp script: Using makemcsim
makemcsims script: Using makemcsim
Markov-chain Monte Carlo simulations: Overview
Markov-chain Monte Carlo simulations: MCMC() specification
MCMC simulations: Overview
MCMC simulations: MCMC() specification
MCMC() specification: MCMC() specification
mod syntax: Syntax of mod files
mod usage: Using mod
Model definition files: Writing and Compiling Structural Models
Model types: Model types
Models, algebraic: Model types
Models, differential: Model types
Models, discrete-time: Model types
Models, statistical: Setting-up statistical models
Monte Carlo simulations: Overview
Monte Carlo simulations: MonteCarlo() specification
MonteCarlo() specification: MonteCarlo() specification
MPI: Using makemcsim

N
NDoses() function: Input functions
NDoses() function: Input functions revisited
NegativeBinomial distribution: Distrib() specification
NegativeBinomialRandom() function: Special functions
Normal cumulative density function: Special functions
Normal density function: Special functions
Normal distribution: Distrib() specification
NormalRandom() function: Special functions
Normal_cv distribution: Distrib() specification
Normal_v distribution: Distrib() specification

O
OptimalDesign() specification: OptimalDesign() specification
Output specification: Output calculations
Output variables: Declarations of global variables
OutputFile() specification: OutputFile() specification
Overview: Overview

P
Parallelization: Installation
Parallelized code: Using makemcsim
Parameter declaration: Declarations of global variables
Parameter scaling: Model initialization
PerDose() function: Input functions
PerDose() function: Input functions revisited
PerExp() function: Input functions
PerExp() function: Input functions revisited
PerTransit() function: Input functions
PerTransit() function: Input functions revisited
Piecewise distribution: Distrib() specification
PiecewiseRandom() function: Special functions
Pitfalls: Common Pitfalls
Poisson distribution: Distrib() specification
PoissonRandom() function: Special functions
Prediction() qualifier, for use in Distrib(): Distrib() specification
Prediction() specification (in Simulation context): Print() specification
Print() specification: Print() specification
PrintStep() specification: PrintStep() specification

Q
Qualifier, Data(): Distrib() specification
Qualifier, Prediction(): Distrib() specification

R
R deSolve: Working with deSolve
Random number, beta: Special functions
Random number, binomial: Special functions
Random number, binomial-beta: Special functions
Random number, Cauchy: Special functions
Random number, Chi-squared: Special functions
Random number, exponential: Special functions
Random number, gamma: Special functions
Random number, general-gamma: Special functions
Random number, inverse-gamma: Special functions
Random number, lognormal: Special functions
Random number, loguniform: Special functions
Random number, negative binomial: Special functions
Random number, normal: Special functions
Random number, piecewise: Special functions
Random number, Poisson: Special functions
Random number, Student t: Special functions
Random number, truncated inverse-gamma: Special functions
Random number, truncated lognormal: Special functions
Random number, truncated normal: Special functions
Random number, uniform: Special functions
Random seed, reading its value: Special functions
Random seed, setting its value: Special functions
Reserved keywords: Keywords List
Running GNU MCSim: Using the compiled program
Running simulations: Running Simulations

S
SBML models: Reading SBML models
Scale, scaling section: Model initialization
Semi-colon: General syntax
SetPoints simulations: Overview
SetPoints() specification: SetPoints() specification
SetSeed() function: Special functions
Setting-up statistical models: Setting-up statistical models
SimType() specification: SimType() specification
Simulation definition files: Running Simulations
Simulation file, syntax: Syntax of simulation files
Simulation sections: Simulation sections
Software license: Licenses
Special functions: General syntax
Special functions: Special functions
Specification, Data(): Data() specification
Specification, Density(): Distrib() specification
Specification, Distrib(): Distrib() specification
Specification, Integrate(): Integrate() specification
Specification, InvTemperature(): MCMC() specification
Specification, Likelihood(): Distrib() specification
Specification, MCMC(): MCMC() specification
Specification, MonteCarlo(): MonteCarlo() specification
Specification, OptimalDesign(): OptimalDesign() specification
Specification, OutputFile(): OutputFile() specification
Specification, Print(): Print() specification
Specification, PrintStep(): PrintStep() specification
Specification, SetPoints(): SetPoints() specification
Specification, SimType(): SimType() specification
Specification, StartTime(): StartTime() specification
Specifications, global: Global specifications
Specifying simulations: Running Simulations
Spikes() function: Input functions
Spikes() function: Input functions revisited
Square brackets: General syntax
StartTime() specification: StartTime() specification
State discontinuities: Events() specification
State variables: Declarations of global variables
Statistical models: Setting-up statistical models
Structural models: Writing and Compiling Structural Models
Structural models: Model types
StudentT distribution: Distrib() specification
StudentTRandom() function: Special functions
Style: Comments on style
Syntax for mod: Syntax of mod files
Syntax of simulation files: Syntax of simulation files

T
Tempered MCMC: MCMC() specification
Template models: Reading SBML models
Tests, logical: General syntax
Triangular distribution: Distrib() specification
Truncated Inverse-gamma distribution: Distrib() specification
Truncated lognormal distribution: Distrib() specification
Truncated normal distribution: Distrib() specification
TruncInvGamma distribution: Distrib() specification
TruncInvGGammaRandom() function: Special functions
TruncLogNormal distribution: Distrib() specification
TruncLogNormalRandom() function: Special functions
TruncLogNormal_v distribution: Distrib() specification
TruncNormal distribution: Distrib() specification
TruncNormalRandom() function: Special functions
TruncNormal_cv distribution: Distrib() specification
TruncNormal_v distribution: Distrib() specification

U
Underscore syntax for vectors: General syntax
Underscore use for template models: Reading SBML models
Uniform distribution: Distrib() specification
UniformRandom() function: Special functions
UserSpecifiedLL distribution: Distrib() specification
Using deSolve: Working with deSolve

V
Variable names: General syntax
Vectorization: General syntax
Vectors: General syntax

W
Working Through an Example: Working Through an Example
Writing and Compiling structural models: Writing and Compiling Structural Models

X
xmcsim: XMCSim

Jump to:   '  
A   B   C   D   E   F   G   H   I   K   L   M   N   O   P   Q   R   S   T   U   V   W   X